I2C CAN-BUS Module - I2C-CAN converter with MCP2551 and MCP2515

RS232/485/422 to CAN converter enabling conversion and communication between RS232, RS485, RS422 interfaces and the CAN interface. It supports the Modbus RTU protocol, has numerous built-in protections, and the metal housing facilitates installation in an industrial environment. Waveshare RS232/485/422 TO CAN

CAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708

Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150

Industrial server with a CAN, RS485 and Ethernet port that allows communication between CAN devices and the network server. It has built-in 2 CAN channels, 1 Ethernet port and a TCP/IP stack. It is enclosed in a metal housing with an industrial design. Waveshare 2-CH-CAN-TO-ETH

TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter

The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter

CAN module based on the SN65HVD230 system, allows you to connect a microcontroller with a CAN bus interface

An extensive CAN to Ethernet converter adapted to difficult industrial conditions. It supports two CAN interfaces, one Ethernet interface and a TCP/IP protocol stack. It also has one RS485 serial port. USR-CANET200

KAmod CAN-TXRX is a CAN bus transceiver with the MCP2542FD system, compatible with the CAN 2.0 and CAN FD standards, enabling sending and reading data with the serial interface voltage level adjustable in the range of 1.7...5 V, equipped with protections and LEDs signaling action

UART-CAN converter module based on the TJA1050 transceiver system. It allows for communication, for example, of a microcontroller via the CAN bus

Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN

The CAN-BUS Arduino Shield v2.0 can be stacked on an Arduino UNO, Arduino Leonardo or Arduino MEGA board. The shield integrates an MCP2515 CAN-BUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device. There is also an integrated MicroSD socket for data storage. DFR0370

2-channel USB to CAN/CAN FD adapter with CAN protocol analyzer function. Supports decoding of CAN 2.0A, CAN 2.0B, ISO11898-1 and CAN FD V.1.0 standards. Dedicated to industrial applications. Waveshare USB-CAN-FD

USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A

Expansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0

RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT