Waveshare CAN interface module (SN65HVD230)

CAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708

The CAN transmitter and receiver module is intended for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. M5Stack U085

An extensive CAN to Ethernet converter adapted to difficult industrial conditions. It supports two CAN interfaces, one Ethernet interface and a TCP/IP protocol stack. It also has one RS485 serial port. USR-CANET200

A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438

Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN

USB - LIN bus converter module. It allows you to connect devices to your computer via the LIN bus. LIN USB CONVERTER (LUC)

Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150

The CAN-BUS Arduino Shield v2.0 can be stacked on an Arduino UNO, Arduino Leonardo or Arduino MEGA board. The shield integrates an MCP2515 CAN-BUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device. There is also an integrated MicroSD socket for data storage. DFR0370

UART-CAN converter module based on the TJA1050 transceiver system. It allows for communication, for example, of a microcontroller via the CAN bus

The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter

USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A

Industrial server with a CAN, RS485 and Ethernet port that allows communication between CAN devices and the network server. It has built-in 2 CAN channels, 1 Ethernet port and a TCP/IP stack. It is enclosed in a metal housing with an industrial design. Waveshare 2-CH-CAN-TO-ETH

TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter

I2C-CAN converter using the MCP2551 and MCP2515 systems and the ATmega168PA microcontroller. The module uses the I2C bus and the Grove connector for communication. Seeed Studio 113020111

KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.

KAmod CAN-TXRX is a CAN bus transceiver with the MCP2542FD system, compatible with the CAN 2.0 and CAN FD standards, enabling sending and reading data with the serial interface voltage level adjustable in the range of 1.7...5 V, equipped with protections and LEDs signaling action