UART-TTL-to-CAN converter WS-TTL-CAN - Waveshare 26077
ID: 1189000
5906623424115
zł42.29
Tax included
zł34.38 tax excl.
Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN
Description
UART-CAN converter module with a built-in microcontroller (MCU) and a CAN transceiver system. The implemented conversion algorithm allows for simple configuration and supports the CAN 2.0A (standard frame) and CAN 2.0B (extended frame) standards. It has 14 sets of configurable filters, allowing it to only receive data within a specific range and type on the CAN bus. The converter supports 4 operating modes: transparent conversion, transparent conversion with identifiers, format conversion and Modbus RTU protocol conversion. In addition, it has a built-in CAN buffer to prevent data loss during transmission. The device software is updated via the TTL interface, which facilitates, among others: adapting functions to individual needs. The pins of the system are available on goldpin pins with a standard 2.54 mm pitch, and the converter works with voltages of 3.3 V. It is a good choice when designing and prototyping devices based on the CAN bus.
Features
- 32-bit MCU
- CAN communication: supports CAN2.0A (standard frame) and CAN 2.0B (extended frame)
- ESD protection and surge protection
- CAN baud rate: 10Kbps to 1000Kbps
- TTL operating voltage: 3.3V
- TTL baud rate: 1200 bps to 460800 bps
- Built-in module operation indicator
- Reset/factory reset
- Power supply: 3.3V
- Current consumption: 40 mA
- Operating temperature: -40 to 85℃
- Operating humidity range: 5 to 95% relative humidity
- Dimensions: 19 x 17.3 mm
1189000
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
CP2102 USB to UART Module, USB micro connector
zł19.54
24h
Available quantity: 11
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.31
Delivery date unknown
No product available!
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 159
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
24h
Available quantity: 206
Available
USB-UART/I2C converter based on the MCP2221 chip. It enables communication of devices with UART or I2C interface with a computer. SB Components 21246
zł67.48
24h
Available quantity: 1
Available
Industrial grade USB-UART TTL converter. Equipped with a number of security features ensuring stable and safe communication. Waveshare USB TO TTL (B)
zł19.35
24h
Available quantity: 21
Available
Other products in the same category (16)
TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter
zł199.90
24h
Available quantity: 1
Available
The module is based on the GD32E103 microcontroller, supporting CAN FD at up to 5 Mbps, making it ideal for automotive and automation applications. With AT command support, Grove connector and compatibility with XIAO RP2040 boards, the module offers easy integration in IoT projects such as monitoring or automation. Seeed Studio 114992978
zł34.23
24h
Available quantity: 3
Available
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 97
Available
The CAN transmitter and receiver module is intended for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. M5Stack U085
zł74.05
24h
Available quantity: 2
Available
Expansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0
zł49.90
24h
Available quantity: 5
Available
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A
zł83.75
24h
Available quantity: 4
Available
CAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708
zł20.20
24h
Available quantity: 12
Available
CAN module based on the SN65HVD230 system, allows you to connect a microcontroller with a CAN bus interface
zł17.90
24h
Available quantity: 16
Available
The CAN-BUS Arduino Shield v2.0 can be stacked on an Arduino UNO, Arduino Leonardo or Arduino MEGA board. The shield integrates an MCP2515 CAN-BUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device. There is also an integrated MicroSD socket for data storage. DFR0370
zł101.00
24h
Available quantity: 1
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł104.00
24h
Available quantity: 2
Available
Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150
zł97.51
24h
Available quantity: 4
Available
Expansion board for XIAO, enabling easy CAN Bus communication by integrating MCP2515 and SN65HVD230. Ideal for applications in vehicles, industrial control systems and robotics, it provides reliable data exchange and easy integration into the XIAO ecosystem. Seeed Studio 105100001
zł49.88
24h
Available quantity: 2
Available
The CAN interface module KAmod with the SN65HVD230 chip enables direct communication with the CAN bus in systems powered by 3.3 V. Compatible with PCA82C250 chips, equipped with ESD protection and functions eliminating interference, it will perform well in industrial, automotive, and IoT projects.
zł16.90
24h
Available quantity: 120
Available
UART-CAN converter module based on the TJA1050 transceiver system. It allows for communication, for example, of a microcontroller via the CAN bus
zł4.24
24h
Available quantity: 56
Available
CANable V2.0 PRO is a USB-C to CAN adapter with galvanic isolation. It supports CAN 2.0 and CAN FD, ensuring reliable communication and broad compatibility. MKS CANable V2.0 PRO
zł129.04
24h
Available quantity: 9
Available
USB - LIN bus converter module. It allows you to connect devices to your computer via the LIN bus. LIN USB CONVERTER (LUC)
zł106.91
24h
Available quantity: 17
Available
Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN