

USB-CAN adapter in the form of a small device with a USB type A connector in the shape of a flash drive. It allows communication via CAN bus between a computer and industrial equipment for testing, development or data analysis. It supports CAN2.0A (standard frame) and CAN2.0B (extended frame) standards with CAN transmission rates ranging from 5Kbps to 1Mbps. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers.
The device can operate in one of four operating modes: normal mode, loopback mode, silent mode, silent loopback mode. This provides great flexibility and versatility of operation. It supports various modes of sending and receiving data, including as a single frame, multiple frames, manual, regular and cyclic sending. It can be configured to receive data only from a specific ID or specify an ID to automatically respond to data.
The module is compact in size and easy to use. It is based on the STM32F103 microcontroller and is equipped with surge protection. It can be used for development and integration into various industrial communication and intelligent control applications that require CAN bus communication. Full documentation and usage examples are available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
2-channel USB-CAN adapter with CAN protocol analyzer function. Dedicated to industrial applications. Waveshare USB-CAN-B
USB adapter for PC, allowing Bluetooth v4.0 communication with speeds up to 3Mb / s and range up to 20m
No product available!
Industrial DIN Rail Power Supply with 10W power, 5VDC output voltage and 2A output current. Mounting on a DIN rail. Built-in overload and short circuit protection. MEAN WELL MDR-10-5
Converter dedicated to industrial applications. It provides communication between the USB interface and the RS232 and RS485 serial standard
Two-channel touch light switch with WiFi, which can control two lighting circuits in the room. It allows you to independently turn on/off each of the two channels and set time schedules using the EWeLink application. Sonoff T0EU2C TX
No product available!
Switching power supply from MEAN WELL, power 40W, output voltage 48VDC and output current 0.83A. Mounting on a DIN rail. Built-in overload and short-circuit protection. MEAN WELL MDR-40-48
RS232/RS485 to WiFi and Ethernet converter that provides easy communication between RS232 or RS485 interface and WiFi wireless network and wired LAN network. Supports the Modbus RTU protocol. USR-W630
USB-RS485 converter for industrial applications. It provides communication between the USB interface and the RS485 serial standard. Waveshare USB TO RS485 (B)
No product available!
Industrial RS232/485 to Ethernet converter. It is equipped with a PoE function and is mounted on a DIN rail. Waveshare RS232 RS485 TO POE ETH (B)
The 16 A flush-mounted Wi-Fi switch provides convenient and remote control of electrical devices in a smart home setup. Easy to install and compatible with voice control and mobile apps, it’s a practical solution for automating everyday tasks.
Module enabling wireless data transmission in 4G LTE mobile networks. It offers support for various protocols such as TCP, UDP, DNS, and various transmission modes such as TCP Client, TCP Server, UDP Client. USR-DR504-EUX
The 2-channel Wi-Fi module enables wireless control of AC-powered devices, supporting two independent circuits up to 2400 W. Home Assistant compatibility, energy monitoring function, and compact size make it an ideal solution for home automation and DIY projects. Seeed Studio 114993526
4-channel RS485 to Ethernet converter designed for industrial environments. Connects serial server, Modbus gateway, MQTT gateway, RS485 to JSON. It has four RS485 ports and one Ethernet port with PoE function. Waveshare 4-CH RS485 TO POE ETH (B)
Memory card designed for S7-1X00 series controllers. It is powered by 3.3V and has a capacity of 24MB. The card is intended for industrial use. Siemens 6ES7954-8LF03-0AA0
No product available!
Digital input module designed for use with the S7-1200 PLC controller. Has 16 digital inputs. Siemens 6ES7221-1BH32-0XB0
No product available!
USB-RS485/RS422 converter dedicated to industrial applications. It provides communication between USB interface and RS485 and RS422 serial standard. YN-4852
No product available!
Temperature and humidity sensor adapted to work with Sonoff TH10 / TH16
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A