Gravity: Analog Adjustable Infrared Sensor Switch - adjustable switch with distance sensor (3-50cm)
ID: 581619
5906623406463
zł32.79
Tax included
zł26.66 tax excl.
The infrared distance sensor enables the detection of objects in the range from 3 to 50cm. The sensor has a digital output, the detection threshold is adjusted by a potentiometer. DFRobot SEN0164
Description
The infrared distance sensor enables the detection of objects in the range from 3 to 50 cm. The sensor has a digital output (Gravity connector), and a low state is generated when an object is detected. The threshold at which the sensor detects an obstacle is adjusted with a potentiometer. It is powered with the voltage of 5 V and has an output with a capacity of up to 100 mA, thanks to which it can directly control small actuators. It can be used as an obstacle sensor in mobile robots and on assembly lines. The Wiki page contains the manual and sample programs.
Attention!
In order to improve the stability of the sensor operation, it is recommended to use an additional pull-up resistor of 1 to 10 kΩ.
Features
- Detection range: 3 to 50 cm (adjustable)
- Control output: 100 mA at 5 V supply
- Elapsed time: <2 ms
- Detection angle: ≤15 °
- Housing material: plastic
- Low state when an object is detected
- Cable length: 45 cm
- Power supply: 5V
- Current consumption: <25mA
- Dimensions: 30 x 20 x 13 mm
581619
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 104
Available
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł22.82
24h
Available quantity: 1
Available
Other products in the same category (5)
Adjustable proximity sensor E18-D80NK allows detection of the object at a distance of 3 - 80 cm. Detection of an obstacle occurs due to the appearance of reflected infrared light.
zł17.77
24h
Available quantity: 22
Available
Capacitive sensor with a range of up to 30 mm featuring a cylindrical M30 housing made of nickel-plated brass and a PBT sensing face. With a PNP NO output and 10-30 VDC power supply. It supports a load current of up to 300 mA, a switching frequency of up to 100 Hz, LED indication, a 2-meter connection cable, and an IP67 protection rating. The sensor can operate in temperatures ranging from -25°C to +70°C
zł154.78
24h
Available quantity: 2
Available
Adjustable proximity sensor E18-D50NK allows detection of the object within 3 - 50 cm. Detection of an obstacle occurs due to the appearance of reflected infrared light.
zł10.90
4 weeks
No product available!
Capacitive proximity sensor with PNP NO output. It can detect the presence of various objects in the range from 1 to 10 mm. The sensor is supplied with the voltage from 6 to 36 V and consumes a current of up to 300 mA. LJC18A3-H-Z/BY
zł29.45
24h
Available quantity: 12
Available
Inductive proximity sensor with NPN NO output. It can detect the presence of metals at a distance of up to 4 mm. The sensor is supplied with the voltage of 5 V and consumes a current of up to 30 mA. E2S-H4N1
zł57.01
4 weeks
No product available!
The infrared distance sensor enables the detection of objects in the range from 3 to 50cm. The sensor has a digital output, the detection threshold is adjusted by a potentiometer. DFRobot SEN0164