M5Stack CAN Unit - isolated CAN bus transceiver
ID: 582060
5906623409341
zł74.05
Tax included
zł60.20 tax excl.
The CAN transmitter and receiver module is intended for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. M5Stack U085
Description
The M5Stack CAN Unit is a CAN transmitter and receiver module designed for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. The bus can support up to 110 nodes, and the signal transmission speed can reach 1 Mb/s. It has built-in current limiting, overvoltage protection, ground loss protection and thermal shutdown functions. The module has a built-in isolated power supply. Full documentation is available on the product page.
The CAN bus is an international serial communication protocol used, among others in the automotive industry and for long-distance communication (up to 10 km). It is characterized by fast data transmission and low failure rate between nodes in the network.
Features
- Maximum voltage: 1000V
- Maximum speed: 1 Mb/s
- Number of Nodes: 110
- Low loop delay: 150 ns
- Common mode voltage: -12 V to 12 V
- Current limitation, overvoltage protection, signal isolation
- Isolated power circuit
- Dimensions: 64 x 24 x 8 mm
- Weight: 12g
Kit contains
- CAN Unit module
- Grove cable
582060
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010
zł249.00
24h
Available quantity: 2
Available
RS485 converter designed for sets from the M5ATOM series. It allows you to connect to development kits devices controlled by the RS485 bus. M5Stack T002
zł44.02
24h
Available quantity: 1
Available
M5Stack series development kit equipped with ESP32. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K001-V26
zł264.91
24h
Available quantity: 1
Available
Other products in the same category (16)
The module is equipped with two buttons in red and blue. It communicates via a digital interface and allows you to add simple controls to your M5Stack based project. M5Stack U025
zł15.90
24h
Available quantity: 4
Available
USB module based on MAX3421E wrap designed for M5Stack sets. It communicates with the evaluation kit via the SPI interface and allows the addition of a Host or USB device function. M5Stack M020
zł89.93
24h
Available quantity: 2
Available
Voltmeter module for M5Stack sets. It can measure DC voltage in the range from 0 to 36 V with an accuracy of approx. 0.5 mV. M5Stack U087
zł107.07
24h
Available quantity: 1
Available
Module with a color LCD 1.14" display with a resolution of 135x240 px. Designed for M5Stack sets. It communicates via the I2C interface. M5Stack U120
zł97.90
24h
Available quantity: 2
Available
The Glass2 Unit by M5STACK is an advanced 1.51-inch transparent OLED display module, ideal for embedded displays, DIY toys, and user interfaces. With I2C support and compatibility with Arduino and UIFlow, it enables easy creation and development of various projects. M5Stack U158-B
zł126.94
24h
Available quantity: 1
Available
A set for building a walking robot. The chassis is equipped with four servos, a controller and an STM32F030 microcontroller. M5Stack U086
zł109.00
24h
Available quantity: 1
Available
The module is equipped with three RGB SK6812 LEDs. It is designed to work with the M5Stack sets. Communicates via a single-wire digital interface. M5Stack U003
zł25.90
24h
Available quantity: 2
Available
A module with a joystick designed for M5Stack sets. Returns data from two axes and button state via the I2C interface. M5Stack U024-C
zł78.90
24h
Available quantity: 1
Available
Module with a passive buzzer designed for M5Stack sets. It is equipped with a Grove connector and is controlled by a square signal. M5Stack U132
zł28.91
24h
Available quantity: 3
Available
IO port expander for M5Stack kits. Equipped with 8 IO pins and power pins, it communicates via the I2C interface. M5Stack U011-B
zł41.91
24h
Available quantity: 1
Available
Module with a light sensor (photoresistor) designed for M5Stack sets. An analog output and a digital output have been led out on the Grove connector. M5Stack U021
zł22.90
24h
Available quantity: 2
Available
Universal module for prototyping. It has 40 prototype fields with a diameter of 1 mm and a race of 2.54 mm and a Grove connector. M5Stack Mini Proto Unit
zł11.12
24h
Available quantity: 1
Available
The module with a fingerprint sensor FPC1020A is designed for the M5Stack sets. The sensor has a built-in memory and can store up to 150 fingerprints. M5Stack U008
zł123.00
24h
Available quantity: 2
Available
The module with SSR BT136S relay with a load of up to 2 A, designed for M5Stack sets. The board is equipped with a Grove connector and is controlled by a digital input. M5Stack U122
zł39.14
24h
Available quantity: 1
Available
The IMU Pro Mini Unit M5Stack U171 is an advanced measurement tool combining motion detection, magnetic field sensing, and atmospheric pressure measurement. Its compact design and I2C interface facilitate integration with various systems, making it widely applicable in navigation, automation, and robotics. M5Stack U171
zł46.36
24h
Available quantity: 1
Available
Module with gas sensor SGP30. It allows you to measure the content of total volatile organic compounds (TVOC), carbon dioxide equivalent (eCO2), ethanol and H2 in the air. M5Stack U088
zł74.89
24h
Available quantity: 1
Available
The CAN transmitter and receiver module is intended for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. M5Stack U085