M5Stack Core2 - IoT development kit with ESP32 module
ID: 581996
5906623435708
zł249.00
Tax included
zł202.44 tax excl.
M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010
Description
M5Core2 is a development kit from the M5Stack series equipped with a WiFi and Bluetooth ESP32 module. ESP32 is a module with a dual-core 32-bit Xtensa 240 MHz LX6 processor, with Wi-Fi and Bluetooth communication, and 16 MB of Flash memory and 8 MB of PSRAM.
The M5Core2 kit has a USB Type-C interface for charging, programming and serial communication, an integrated 2" capacitive touch screen and a built-in vibration motor. The kit also has a built-in RTC module. Power is managed by AXP192 energy management and a green power indicator The LED helps inform the user about the battery level. The battery capacity has been increased compared to the previous generation to 390 mAh, so it can power the set much longer than the previous model. The M5Core2 also has a microSD card slot and speakers, as well as power and reset buttons. 3 icons with On the front of the screen are programmable capacitive buttons, and on the back of the case is a small expansion board with a 6-axis IMU sensor and microphone.
M5Stack Core2 can be programmed via Arduino, UIFlow (using Blockly, MicroPython language). The set will be perfect for IoT-related projects, as a STEM educational module or in Smart Home devices.
Full documentation of the kit and tutorial are available on the manufacturer's website.
Features
- ESP32-D0WD-V3
- 240 MHz dual core
- 600 DMIPS
- 520 KB of SRAM
- Wi-Fi
- Bluetooth
- Flash 16 MB
- 8MB PSRAM
- Interface: USB type C, GROVE (I2C + I/O + UART)
- IPS LCD screen, 2.0", 320x240 px, ILI9342C
- FT6336U touch screen
- 1W-0928 speaker
- Green power LED
- Power button, RST button, 3 x screen button
- Vibration motor
- SPM1423 microphone
- I2S NS4168 power amplifier
- 6-axis IMU MPU6886
- RTC BM8563
- PMU AXP192
- USB chip CP2104
- Gain DC-DC SY7088
- MicroSD card slot up to 16 GB
- 390mAh lithium battery @ 3.7V
- Antenna 2.4G 3D antenna
- Housing: PC
- Power supply: 5 V / 500 mA
- Operating temperature: 0°C to 40°C
- Dimensions: 54 x 54 x 16 mm
- Weight: 52 g
Kit contains
- M5Stack Core2
- USB Type C cable, 20 cm
581996
Data sheet
- Microcontroller
- ESP32
- Flash memory
- 16 MB
- Number of I/O
- None
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- Yes
- MicroSD slot
- Yes
- Length
- 54 mm
- Width
- 54 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71
24h
Available quantity: 22
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
Delivery date unknown
No product available!
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
zł47.90
24h
Available quantity: 5
Available
M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B
zł83.74
Delivery date unknown
No product available!
Other products in the same category (16)
IO port expander for M5Stack kits. Equipped with 8 IO pins and power pins, it communicates via the I2C interface. M5Stack U011-B
zł38.90
24h
Available quantity: 1
Available
A module with a rotary encoder and RGB LED lighting for M5Stack sets. It communicates via the I2C interface. M5Stack U135
zł52.90
24h
Available quantity: 3
Available
USB module based on MAX3421E wrap designed for M5Stack sets. It communicates with the evaluation kit via the SPI interface and allows the addition of a Host or USB device function. M5Stack M020
zł89.93
24h
Available quantity: 1
Available
A 16-bit DAC converter module designed to work with M5Stack sets. It enables the conversion of analog signals into a digital signal. M5Stack ADC Unit
zł31.89
24h
Available quantity: 9
Available
Ammeter module designed for M5Stack sets. It can measure direct current in the range from 0 to 4 A with a resolution of approx. 0.15 mA. M5Stack U086
zł104.03
24h
Available quantity: 1
Available
Module with a 10 kΩ rotary potentiometer for M5Stack sets. M5Stack U005
zł25.90
24h
Available quantity: 1
Available
The DLight Unit module with the BH1750FVI-TR sensor enables digital illuminance measurement with high resolution and low power consumption. It is suitable for automation systems, measurement devices, and IoT projects requiring precise light detection. M5Stack U096
zł29.72
24h
Available quantity: 2
Available
Advanced programmable logic controller (PLC) based on ESP32-S3, designed for industrial, automation and remote monitoring applications. It offers 8 optically isolated digital inputs, 4 relay outputs, PWR-CAN and PWR-485 interfaces and the ability to communicate with the EZDATA cloud. With wide power supply options, display, sensors and easy integration with Grove sensors, it is a comprehensive solution for IoT and automation systems. M5Stack K141
zł229.87
24h
Available quantity: 4
Available
5-port Hub with Grove connectors for M5Stack sets. It allows you to connect several devices with Grove connectors to the evaluation kit. M5Stack Grove-T
zł40.90
24h
Available quantity: 2
Available
DAC 2 Hat module for M5StickC – precise I2C digital-to-analog conversion (0–5V / 0–10V) with short-circuit protection. M5Stack U068-B
zł41.18
24h
Available quantity: 1
Available
Compact M5Stack series development kit equipped with ESP32 Pico. It is based on a loudspeaker, I2S amplifier and a microphone. It will work in IoT-related projects, as a portable Bluetooth speaker or a voice-controlled device. M5Stack C008-C
zł72.63
24h
Available quantity: 6
Available
Universal display driver with HDMI output. The kit includes the ATOM PSRAM module that provides Wi-Fi 2.4G communication, has 8 MB Flash memory and 2 MB PSRAM. M5Stack K115
zł232.65
24h
Available quantity: 1
Available
Compact module designed for M5StickC, enabling control using an analog joystick with a button function. It uses the STM32F030F4 microcontroller and communicates via the I2C interface, transmitting tilt and press data. Thanks to its ergonomic shape and easy integration, it is suitable for games, DIY projects and interactive control systems. M5Stack U073
zł46.24
24h
Available quantity: 3
Available
Module with gas sensor SGP30. It allows you to measure the content of total volatile organic compounds (TVOC), carbon dioxide equivalent (eCO2), ethanol and H2 in the air. M5Stack U088
zł74.89
24h
Available quantity: 1
Available
Module with a light intensity sensor BH1750FVI dedicated to the M5StickC sets. It communicates via the I2C interface. M5Stack U134
zł27.90
1 weeks
No product available!
The module with SSR BT136S relay with a load of up to 2 A, designed for M5Stack sets. The board is equipped with a Grove connector and is controlled by a digital input. M5Stack U122
zł39.14
24h
Available quantity: 1
Available
M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010