New products
New products
€16.39
24h
Available
€16.63
24h
Available
€16.39
24h
Available
Available
€19.04
24h
Available
€16.39
24h
Available
€16.63
24h
Available
€16.39
24h
Available
Available
€19.04
24h
Available
M5Stack 2-Channel SPST Relay Unit - module with 2 relays
ID: 1179008
5906623409563
€9.62
Tax included
€7.82 tax excl.
The module with 2 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 8 A or a voltage of 28 V DC and a current of 8 A. M5Stack U131
Description
The module with 2 relays is designed for the M5Stack sets. It allows you to control devices with operating voltage up to 250 V AC and amperage of 8 A or voltage of 28 V DC and amperage of 8 A. On the board there are LEDs signaling the switching status of the relays. The module will be used in applications in the field of home automation, industry and security systems. Full documentation of the module with examples of use is available on the product page.
Features
- 2 x relays 8 A 250 V AC or 8 A 28 V DC
- LED indicators of the state of switching on relays
- Output interface: 4-pin terminal
- Supply voltage: 5V
- Switch-on time: 8 ms
- Disconnection time: 5 ms
- Dimensions: 54 x 24 x 19 mm
Kit contains
- M5Stack 2-Channel SPST Relay Unit
- Grove cable
- 2 x connector plug
1179008
Data sheet
- Output current
- 8 A
- Number of channels
- 2
- Executive element
- Przekaźnik
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
M5Stack series development kit equipped with ESP32. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K001
Delivery date unknown No product available!
M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B
€20.46 24hAvailable quantity: 2 AvailableThe universal DIY prototype module from the M5stack series with M-BUS connector. M5Stack M032
€6.89 24hAvailable quantity: 2 AvailableThe module with SSR BT136S relay with a load of up to 2 A, designed for M5Stack sets. The board is equipped with a Grove connector and is controlled by a digital input. M5Stack U122
€9.43 24hAvailable quantity: 1 Available
Other products in the same category (16)
ATOM Lite development kit complete with microSD card reader up to 16 GB. M5Stack K044
€27.69 24hAvailable quantity: 2 AvailableATOM Lite development kit complete with DRV8825 stepper motor driver module. M5Stack ATOM STEPMOTOR
€23.47 24hAvailable quantity: 1 AvailableDC-DC Step-Down Converter ME3116AM6G with an output voltage of 5 V, input voltage from 6 to 24 V and a maximum output current of 1 A. Dedicated to the M5Stack modules. M5Stack U125
€5.04 24hAvailable quantity: 1 AvailableAmmeter module designed for M5Stack sets. It can measure direct current in the range from 0 to 4 A with a resolution of approx. 0.15 mA. M5Stack U086
€27.00 24hAvailable quantity: 1 AvailableA set for building a walking robot. The chassis is equipped with four servos, a controller and an STM32F030 microcontroller. M5Stack U086
€26.27 24hAvailable quantity: 1 AvailableThe module with the GPS AT6558 chip, designed for the M5Stack sets. The system can receive data from the main positioning systems: GPS, GLONASS, BDS, Galileo, QZSS and SBAS. M5Stack U032
€17.12 24hAvailable quantity: 1 AvailableModule with receiver designed for communication by means of a laser beam transmitted in the air. M5Stack Laser.Rx Unit
€5.76 24hAvailable quantity: 1 AvailableThe module with the relay is designed for the M5Stack sets. It allows you to control devices with a working voltage of up to 220 V AC and a current of up to 3 A or a voltage of 30 V DC and an intensity of 3 A. M5Stack U023
€5.11 24hAvailable quantity: 5 AvailableLipo battery with a capacity of 750 mAh for the M5Stack sets. Modules can be connected in parallel and stacked. M5Stack M002
€10.94 24hAvailable quantity: 1 AvailableIsolated UART-RS485 converter designed for M5Stack sets. It allows communication within an industrial serial interface. M5Stack U094
€13.98 24hAvailable quantity: 3 AvailableKit for building a worm robot. The chassis is equipped with four motors and a controller, 2 RGB diodes and an STM32F030 microcontroller. M5Stack K033
€22.87 24hAvailable quantity: 1 Available- M5stack Display Module 13.2 - HD audio and video expansion module for M5Stack Core and M5Stack Core2
Versatile expansion module enabling support for high definition (HD) audio and video. It uses the advanced GAOYUN GW1NR series FPGA to generate the display signal and the LT8618S to process the output signal. M5stack M126
€40.73 24hAvailable quantity: 1 Available 6-port IO port expander for M5Stack kits. It is equipped with 6 Grove connectors, it is based on the ATmega328 microcontroller, which communicates via the I2C interface. M5Stack PbHUB Unit
€16.36 24hAvailable quantity: 1 Available6-port I2C port expander for M5Stack sets. It allows you to connect several devices with the same address to one I2C bus. M5Stack U040-B
€11.74 24hAvailable quantity: 1 AvailableA module with a 433 MHz radio transmitter for the M5Stack sets. Based on the SYN115 chip, it has a built-in PCB antenna. M5Stack U114
€6.44 24hAvailable quantity: 6 AvailableThe module with 4 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 10 A or a voltage of 28 V DC and a current of 10 A. M5Stack U097
€18.17 24hAvailable quantity: 1 Available
The module with 2 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 8 A or a voltage of 28 V DC and a current of 8 A. M5Stack U131