USB-CAN Converter (CAN FD) - MKS CANable V2.0 S - Makerbase

The CAN transmitter and receiver module is intended for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. M5Stack U085

A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438

KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.

TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter

I2C-CAN converter using the MCP2551 and MCP2515 systems and the ATmega168PA microcontroller. The module uses the I2C bus and the Grove connector for communication. Seeed Studio 113020111

USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A

CAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708

Expansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0

Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150

Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN

KAmod CAN-TXRX is a CAN bus transceiver with the MCP2542FD system, compatible with the CAN 2.0 and CAN FD standards, enabling sending and reading data with the serial interface voltage level adjustable in the range of 1.7...5 V, equipped with protections and LEDs signaling action

The module is based on the GD32E103 microcontroller, supporting CAN FD at up to 5 Mbps, making it ideal for automotive and automation applications. With AT command support, Grove connector and compatibility with XIAO RP2040 boards, the module offers easy integration in IoT projects such as monitoring or automation. Seeed Studio 114992978

CANable V2.0 PRO is a USB-C to CAN adapter with galvanic isolation. It supports CAN 2.0 and CAN FD, ensuring reliable communication and broad compatibility. MKS CANable V2.0 PRO

Expansion board for XIAO, enabling easy CAN Bus communication by integrating MCP2515 and SN65HVD230. Ideal for applications in vehicles, industrial control systems and robotics, it provides reliable data exchange and easy integration into the XIAO ecosystem. Seeed Studio 105100001

The CAN interface module KAmod with the SN65HVD230 chip enables direct communication with the CAN bus in systems powered by 3.3 V. Compatible with PCA82C250 chips, equipped with ESD protection and functions eliminating interference, it will perform well in industrial, automotive, and IoT projects.

CAN bus transceiver module based on the NXP TJA1051T/3 chip, designed to work with microcontrollers and CAN controllers using RX and TX signals. Supports data transmission at speeds up to 1 Mbps and a supply voltage of 3 V to 5 V thanks to the built-in step-up converter. Equipped with a switchable 120 Ω termination resistor, an SLNT input for activating Silent mode, and connectors for CAN bus communication. The 32 x 19 mm board is designed for automation systems, robotics, and communication between electronic devices. KAmod CAN TJA1051