CANable V2.0 PRO is a USB-C to CAN adapter with galvanic isolation. It supports CAN 2.0 and CAN FD, ensuring reliable communication and broad compatibility. MKS CANable V2.0 PRO
List of products by brand Makerbase
Makerbase - Motor Controllers and Electronic Modules
Makerbase develops control electronics for electric drive systems, automation, robotics and projects using brushless motors. The brand's product range includes BLDC motor controllers, FOC controllers, ESCs, ESP32-based modules and solutions compatible with ODrive and VESC platforms, providing options for drive systems with different voltage, current and motor control requirements.
There are 42 products.
The ODrive3.6 ESC speed controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6
A speed controller based on the open VESC standard, designed for skateboards, scooters, and e-bikes. It supports voltages from 14 to 84 V (4S–20S) and continuous currents up to 100 A, offering various BLDC motor control modes and a wide range of interfaces (PPM, UART, I2C, USB-C, CAN). Its compact design, aluminum PCB, and extensive safety features ensure reliability, flexible configuration, and convenient integration with computers and smartphones. Makerbase VESC 75100 V2
Makerbase MKS AS5600 V2.0 magnetic encoder for contactless measurement of motor shaft angular position over a 360° range. Features a 12-bit AS5600 sensor with a resolution of 4096 positions per revolution, an I²C interface and an analog/PWM output. Powered by 5 V DC, the module features 6-pin and 3-pin connectors and a PCB measuring 31.2 x 31.2 mm. Designed for positioning systems, robotics and closed-loop motor control applications. The kit includes two 30 cm connection cables and a 6 x 2.5 mm magnet. Makerbase MKS AS5600 V2.0
Makerbase MKS 3MOS expansion module for independent control of three fans in 3D printers. Features three MOSFET outputs, each supporting a current below 1 A, and operates with a supply voltage of 12 V to 24 V DC. Installs into an available, compatible StepStick motor driver socket and uses ENABLE, STEP and DIR signals for fan control. Requires appropriate configuration of the mainboard firmware. Makerbase MKS 3MOS
TMC2209 V2.0 bipolar stepper motor driver module in the StepStick form factor, designed for motor control in 3D printers, CNC machines, and automation equipment. Supports a 4.75V to 29V DC motor supply, STEP/DIR control, UART configuration, and interpolation up to 256 microsteps. StealthChop2, SpreadCycle, and StallGuard4 technologies provide quiet motor operation, current regulation, and sensorless load detection. Makerbase TMC2209 V2.0
Communication module based on the ESP32 microcontroller, designed for wireless configuration, diagnostics and monitoring of VESC motor controllers via WiFi and Bluetooth. Equipped with a CAN interface and a microSD card slot for logging motor drive operating data. Supports external GPS/GNSS receivers and enables parameter analysis and firmware updates using VESC Tool. Makerbase MKS Express
Makerbase MKS SERVO57D RS485 MB closed-loop stepper motor driver for two-phase NEMA 23 motors. Features an N32L406 microcontroller, a 14-bit magnetic encoder and the FOC control algorithm. Supports a supply voltage of 12 V to 24 V DC, adjustable motor current from 0 A to 5.2 A, STEP/DIR pulse control and RS485 communication. Equipped with a built-in display, configuration buttons and limit switch inputs. The kit includes the driver, aluminum housing, MKS APT adapter, a 100 cm 6-pin cable and mounting components, without a motor. Makerbase MKS SERVO57D RS485 MB
Makerbase MKS SERVO57D BUS MB closed-loop stepper motor driver for two-phase NEMA 23 motors. Features an N32L406 microcontroller, the FOC control algorithm and a 14-bit magnetic encoder. Supports a supply voltage of 12 V to 24 V DC, motor current from 0 A to 5.2 A, and RS485 and CAN bus communication. Provides torque, speed and position control, with parameter configuration using the built-in display and buttons. The kit includes the driver, aluminum housing, magnet, two cables and mounting components, without a motor. Makerbase MKS SERVO57D BUS MB
Makerbase MKS SERVO57D RS485 Plug MB closed-loop stepper motor driver for two-phase NEMA 23 motors. Features an N32L406 microcontroller, a 14-bit magnetic encoder and the FOC control algorithm. Supports a supply voltage of 12 V to 24 V DC, adjustable motor current from 0 A to 5.2 A, STEP/DIR pulse control at frequencies up to 160 kHz and RS485 communication. The Plug version features multi-pin connectors for signal wiring. The kit includes the driver, aluminum housing, two 50 cm KF2510-8P cables and mounting components, without a motor. Makerbase MKS SERVO57D RS485 Plug MB
Makerbase MKS TMC2160-OC stepper motor driver designed to control a single bipolar stepper motor in 3D printers, CNC machines and automation systems. Based on the TMC2160 IC, it supports a supply voltage of 9 V to 40 V DC and eight peak output current settings ranging from 2.30 A to 4.33 A. Features optocoupler-isolated STEP/DIR control inputs, DIP switches for configuring microstepping up to 1/64 step, and StealthChop and SpreadCycle operating modes. Makerbase MKS TMC2160-OC
Makerbase MKS SERVO57C MB1 closed-loop stepper motor driver designed for NEMA 23 motors. Features a 32-bit AT32F421 microcontroller running at 120 MHz, a 14-bit magnetic encoder and a Field-Oriented Control (FOC) algorithm. Supports a 12 V to 24 V DC supply, an operating current range of 0 A to 5.2 A, STEP/DIR pulse control at frequencies up to 120 kHz, and UART TTL and RS485 communication. The kit includes the driver board, MKS APT adapter, two heatsinks and mounting hardware, without a motor. Makerbase MKS SERVO57C MB1
Makerbase MKS SERVO57ES RS485 MB closed-loop stepper motor driver for NEMA 23 motors, featuring a 15-bit MT6826S magnetic encoder and a Field-Oriented Control (FOC) algorithm. Operates with a supply voltage of 20 V to 48 V DC and supports an operating current range of 0 A to 5.2 A. Provides STEP/DIR pulse control at frequencies up to 300 kHz, RS485 communication with the Modbus RTU protocol, and torque, speed and position control at rotational speeds up to 3000 rpm. The kit includes the driver, aluminum housing, mounting hardware and cables, without a motor. Makerbase MKS SERVO57ES RS485 MB
Stepper motor controller for two-phase NEMA 17 motors, featuring an FOC algorithm and a 14-bit magnetic encoder for closed-loop position control. Supports a supply voltage of 7 V to 28 V DC, motor current up to 3 A, microstepping from 1 to 256, and STEP/DIR and UART control. Designed for 3D printers, CNC machines and positioning systems. The kit includes the controller board, MKS APT adapter and mounting accessories, without a stepper motor. Makerbase MKS SERVO42C PCBA
Makerbase MKS ESC_BT V1.0 wireless communication module for VESC motor controllers. Features a Nordic nRF51822QFAC microcontroller and Bluetooth communication in the 2.4 GHz band, enabling a connection between a VESC controller and the VESC Tool application on Android devices. Supports parameter configuration, drive monitoring, motor control and VESC controller firmware updates. Operates at a supply voltage of 3.3 V to 5 V DC and uses a UART interface with a transmission speed of 115200 bit/s. The PCB measures 27 x 13 x 1.6 mm. The kit includes the module with a connection cable and antenna. Makerbase MKS ESC_BT V1.0
NEMA17 stepper motor driver with closed-loop feedback control, a 14-bit magnetic encoder and RS485 communication using the MODBUS-RTU protocol. The system operates at a voltage from 12 V to 24 V, supports a current of up to 3000 mA, microstepping from 1 to 256 and pulse signals with a frequency of up to 160 kHz. Makerbase MKS SERVO42D RS485 MB
NEMA17 stepper motor with a 40 mm body, integrated closed-loop driver, 14-bit magnetic encoder and RS485 communication using the MODBUS-RTU protocol. The driver operates at a voltage from 12 V to 24 V, supports a current of up to 3000 mA, microstepping from 1 to 256 and pulse signals with a frequency of up to 160 kHz. Makerbase MKS SERVO42D RS485 MT
32-bit Makerbase MKS Robin Nano V3.1 motherboard designed for controlling 3D printers, featuring an STM32F407VET6 microcontroller operating at 168 MHz, 512 KB Flash memory and 192 KB RAM. Supports a 12 V or 24 V DC power supply, five stepper motor driver sockets, six motor connectors, two PWM fan channels, and USB and microSD interfaces. Equipped with heater outputs, thermistor inputs and power circuit protection. Makerbase MKS Robin Nano V3.1 (Only motherboard)
Makerbase MKS AntiSpark Switch V2 electronic power switch designed to reduce sparking when switching DC circuits on. Supports a continuous current of up to 150 A and a manufacturer-specified maximum current of 300 A. Suitable for installations operating at up to 90 V DC, with a recommended maximum operating voltage of 80 V DC. Features four HYG015N10NS1TA MOSFETs, an aluminum-substrate PCB and 2 mm thick copper conductors. Equipped with a 12 mm latching push button with LED illumination. Designed for BLDC motor drives, electric vehicles, robots and battery-powered equipment. Makerbase MKS AntiSpark Switch V2
Makerbase MKS SERVO57D CAN MB closed-loop stepper motor controller for two-phase NEMA 23 stepper motors. Equipped with an N32L406 microcontroller, a 14-bit magnetic encoder and an FOC control algorithm. Supports a supply voltage of 12 V to 24 V DC, adjustable motor current from 0 A to 5.2 A and CAN communication at speeds up to 1 Mb/s. Provides torque, speed and position control, with configuration via the integrated display and buttons. The kit includes the controller, aluminum housing, magnet, thermal silicone pad, mounting hardware and a 100 cm 6-pin cable, without a motor. Makerbase MKS SERVO57D CAN MB
BLDC Motor Controllers
Makerbase offers controllers designed for brushless BLDC motors used in robotics, automation and electrically driven systems. Available solutions range from compact modules for individual drives to dual-channel controllers capable of controlling two motors from a single board.
FOC Control
The Makerbase product range includes controllers using FOC - Field Oriented Control for vector motor control. MKS ESP32 FOC and DUAL FOC solutions can be used in projects requiring precise control of torque, speed and brushless motor operation.
ODrive Controllers
The range also includes controllers based on ODrive solutions for brushless motors used in more advanced drive systems. ODrive-S and ODrive3.6 controllers can be used to develop BLDC drive systems for robots, positioning mechanisms, mobile platforms and automation applications.
ESC and VESC Controllers
Makerbase also provides ESC controllers, including solutions compatible with the VESC ecosystem. Controllers designed for higher voltage and current levels can be used in electric drive systems requiring speed regulation and control of BLDC motor operating parameters.
Modules for Robotics and Automation
Makerbase electronics can be used to develop drive control systems for robots, mobile platforms, automation mechanisms and mechatronic projects. Controllers with different channel counts, supply voltage ranges, current ratings and control methods allow the electronics to be selected according to the requirements of a specific drive system.