.png)
- New
Makerbase MKS AntiSpark Switch V2 - 150A Power Switch
ID: 1209231
zł383.56
Tax included
zł311.84 tax excl.
Makerbase MKS AntiSpark Switch V2 electronic power switch designed to reduce sparking when switching DC circuits on. Supports a continuous current of up to 150 A and a manufacturer-specified maximum current of 300 A. Suitable for installations operating at up to 90 V DC, with a recommended maximum operating voltage of 80 V DC. Features four HYG015N10NS1TA MOSFETs, an aluminum-substrate PCB and 2 mm thick copper conductors. Equipped with a 12 mm latching push button with LED illumination. Designed for BLDC motor drives, electric vehicles, robots and battery-powered equipment. Makerbase MKS AntiSpark Switch V2
Description
The Makerbase MKS AntiSpark Switch V2 electronic power switch is designed for switching high-current DC circuits on and off. The circuit uses MOSFET transistors and an AntiSpark function to reduce sparking when powering devices equipped with input capacitors. Reducing electrical arcing helps protect power connector contacts against damage and oxidation. The switch can be used in electric skateboards, electric bicycles and scooters, mobile robots and battery-powered drive systems equipped with BLDC motor controllers.
The MKS AntiSpark Switch V2 supports a continuous current of up to 150 A and a manufacturer-specified maximum current of 300 A. The maximum input voltage is 90 V DC, corresponding to battery configurations of up to 20S, while the manufacturer recommends 80 V DC as the upper safe operating voltage limit. These specifications should be considered when selecting the battery, motor controller and electrical protection devices. Version V2 supports higher voltage and current ratings than the previous MKS AntiSpark Switch V1.
The switching stage uses four HYG015N10NS1TA MOSFET transistors. The circuit is built on an aluminum-substrate PCB, which helps dissipate heat generated during high-current operation. The design also incorporates 2 mm thick tin-plated T2 copper strips in the current path. The aluminum substrate and conductive components support operation under heavy electrical loads. Actual operating conditions depend on ambient temperature, mounting arrangement and electrical load.
Power switching is controlled by a mechanical latching push button with LED illumination and a diameter of 12 mm. Pressing the button turns on the power output and illuminates the LED indicator. Pressing it again disconnects the circuit and turns off the illumination. The button is connected to the module by a separate control cable, allowing installation in an accessible location on the device enclosure, independently of the main power module.
The switch features factory-installed power cables on the input (IN) and output (OUT) sides. The module is installed in series between the battery and the electrical load, following the polarity and connection direction markings. The enclosure measures 68 x 34 x 9.5 mm and includes mounting holes for securing the module. Before installation, disconnect the battery, verify cable polarity and provide overcurrent protection appropriate for the electrical system. The AntiSpark switch does not replace a fuse or a battery management system (BMS).
Features
- Technical specifications
- Model: MKS AntiSpark Switch V2
- Manufacturer: Makerbase
- Device type: electronic DC power switch with AntiSpark function
- Continuous current: up to 150 A
- Maximum manufacturer-specified current: 300 A
- Maximum input voltage: 90 V DC
- Recommended maximum operating voltage: 80 V DC
- Supported battery configurations: up to 20S, subject to the voltage limit
- Enclosure dimensions: 68 x 34 x 9.5 mm
- Electronic circuit and construction
- AntiSpark function to reduce sparking when switching on the power supply
- Electronic power switching using MOSFET transistors
- MOSFET transistors: 4x HYG015N10NS1TA
- Aluminum-substrate PCB
- Tin-plated T2 copper strips in the current path
- Copper strip thickness: 2 mm
- Aluminum construction supporting heat dissipation
- Enclosure with mounting holes
- Factory-installed power cables
- Control and connections
- Control button: mechanical, latching
- Button diameter: 12 mm
- Button illumination: LED
- Power-on indication via illuminated button
- Separate control cable for the push button
- Power input: IN+, IN-
- Power output: OUT+, OUT-
- Installation in the power circuit between the battery and the load
Kit Includes
- 1x Makerbase MKS AntiSpark Switch V2 with factory-installed power cables and LED push button
1209231
Data sheet
- Upper DC current range
- 300 A
- Supply voltage min
- 0 V
- Supply voltages max
- 90 V
- Protection type
- AntiSpark
- Rds(on) Resistance (mΩ)
- 1,5 mΩ
Other products in the same category (16)
Module with a 5x20 mm fuse with a working voltage up to 250 VAC and a current of 500 mA. A kit for self-assembly. SparkFun KIT-15702
zł36.06
3 weeks
No product available!
Module designed to filter electrical signals. It uses an LC filter, which consists of a coil and a capacitor, to eliminate noise and unwanted components from the electrical signal. It can filter signals with voltages up to 30 V and currents up to 3 A
zł10.55
24h
Available quantity: 5
Available
The module is designed for easy and reliable switching between two different power sources. It ensures safe use of two power sources (with voltage from 1.6 to 5.5 V) without the risk of damaging components. Adafruit 5830
zł13.87
24h
Available quantity: 47
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
zł32.64
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł24.03
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387
zł30.47
24h
Available quantity: 4
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5386
zł23.27
24h
Available quantity: 5
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383
zł18.60
24h
Available quantity: 61
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 00 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5382
zł14.81
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381
zł83.91
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 30 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5380
zł12.35
4 weeks
No product available!
This ideal diode module allows for safe connection of two power supplies to a common output point, preventing reverse current flow. Built-in 20mΩ resistors allow for simple voltage compensation and load balancing between the power supplies. The board offers flexible input and output connectors, facilitating integration into industrial and hobby systems requiring high power reliability. Pololu 5398
zł40.25
4 weeks
No product available!
A protection module that acts like a perfect diode, allowing current to flow in only one direction with minimal energy loss. It supports voltages from 2.7V to 23V and currents up to 5A, providing effective protection against overvoltages and reverse current. It features an IMON output for current monitoring and a Power Good indicator to indicate correct operation. Its screw terminals and compact design make it ideal for battery-powered projects. Adafruit 6359
zł25.63
24h
Available quantity: 1
Available
everse voltage protection module operating in the 4–75 V range and up to 17 A, based on a MOSFET with very low Rds(on). Does not block reverse current. Designed for higher-current power systems, including battery-powered and motor-drive applications. Pololu 5359
zł28.55
24h
Available quantity: 9
Available
Reverse voltage protection module operating in the 4–75 V range and up to 8 A, based on a low-resistance MOSFET with Rds(on) below 15 mΩ. It does not block reverse current. Designed for power supply systems, including battery-powered applications. Pololu 5358.
zł14.90
24h
Available quantity: 2
Available
Makerbase MKS AntiSpark Switch V2 electronic power switch designed to reduce sparking when switching DC circuits on. Supports a continuous current of up to 150 A and a manufacturer-specified maximum current of 300 A. Suitable for installations operating at up to 90 V DC, with a recommended maximum operating voltage of 80 V DC. Features four HYG015N10NS1TA MOSFETs, an aluminum-substrate PCB and 2 mm thick copper conductors. Equipped with a 12 mm latching push button with LED illumination. Designed for BLDC motor drives, electric vehicles, robots and battery-powered equipment. Makerbase MKS AntiSpark Switch V2
zł383.56
24h
Available quantity: 3
Available
Makerbase MKS AntiSpark Switch V2 electronic power switch designed to reduce sparking when switching DC circuits on. Supports a continuous current of up to 150 A and a manufacturer-specified maximum current of 300 A. Suitable for installations operating at up to 90 V DC, with a recommended maximum operating voltage of 80 V DC. Features four HYG015N10NS1TA MOSFETs, an aluminum-substrate PCB and 2 mm thick copper conductors. Equipped with a 12 mm latching push button with LED illumination. Designed for BLDC motor drives, electric vehicles, robots and battery-powered equipment. Makerbase MKS AntiSpark Switch V2