Grove LED Strip Driver - module with RGB LED driver
ID: 1178623
5906623416257
zł54.85
Tax included
zł44.59 tax excl.
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
Description
A module with an LED driver that allows you to control the brightness of a single-color LED strip, as well as the color and brightness of the RGB LED strip via Arduino or Seeeduino. It has 2 screw connectors and 2 Grove interfaces, and power to the LED strip is provided by a 2 pin clamp. Grove interfaces are labeled "IN" (input control data) and "OUT" (output to control the next module). The board can control the LED strip with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. The driver in combination with colored LED strips can provide interesting lighting effects in projects inside or outside buildings. Full documentation and sample programs are available on the product page.
Features
- Grove interface
- Possibility to connect several modules with each other
- Can drive 1 to 2 meters long LED strip at 9V or 1 to 5 meters at 12V
- PWM output
- 8-bit brightness control resolution
- Screw connections
- Dimensions: 20 x 60 mm
1178623
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 20
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
zł26.01
24h
Available quantity: 119
Available
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
zł37.99
24h
Available quantity: 4
Available
Expansion module for Seeeduino XIAO. It is equipped with an OLED display, RTC, MiniSD slot, buzzer, buttons, servo connector and numerous interfaces. Seeed Studio 103030356
zł67.61
Delivery date unknown
No product available!
Other products in the same category (16)
LED and audio controller designed for lighting effects in LEGO® compatible models, dioramas and decorations. It offers six mono channels, one RGB channel, audio amplifier, sensor inputs and a Qw/ST connector – all without the need for soldering. It enables the creation of advanced animations, lighting effects and synchronized audio in a compact form factor. Pimoroni PIM718
zł110.60
24h
Available quantity: 1
Available
KAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł21.89
24h
Available quantity: 214
Available
A set of elements that allows you to build an economical lamp powered from a mains socket using a standard micro USB charger. In this version, a dedicated board is used, which makes the set more aesthetic and easier to assemble. Kitronik 2161
zł19.38
24h
Available quantity: 3
Available
Available
Single-color LED strip driver. It allows you to control strips with LEDs powered with voltage from 12 to 24 V using built-in buttons
zł6.41
24h
Available quantity: 9
Available
RGB color control board based on STP04CM05, STM, RoHS
zł191.94
24h
Available quantity: 1
Available
Ready-to-use LED controller with ESP32 and enclosure, compatible with WLED. Wi-Fi support, 5V outputs, microphone, IR, NeoPixel, and screw terminals. Adafruit 6333
zł100.17
24h
Available quantity: 3
Available
Available
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
zł24.51
24h
Available quantity: 4
Available
Compact board for controlling RGB and white LED strips, allowing easy connection without the need for soldering. With WS2811F and N-channel FETs, it supports up to 3A of current per channel, making it ideal for high-current LED strips, but does not support RGBW strips. Adafruit 5888
zł25.58
24h
Available quantity: 1
Available
Compact ESP32 based board designed for lighting and WLED projects, offering WiFi, Bluetooth and efficient power supply via USB Type-C (up to 4A). It offers two LED outputs with logic level conversion, a built-in I2S microphone, STEMMA QT port, button, NeoPixel and additional GPIO pins. With support for multiple platforms (Arduino, MicroPython, CircuitPython, ESP-IDF), it is ideal for wearable devices and interactive projects. Adafruit 6160
zł94.89
24h
Available quantity: 4
Available
The Pico-DALI2 module enables the implementation of DALI2 communication in projects based on ESP32-C6-Pico and ESP32-S3-Pico boards. Thanks to its compatibility with the Pico interface, DALI screw terminals, and ready-to-use programming examples, it is well-suited for smart lighting and building automation applications.
zł23.19
4 weeks
No product available!
RGB LED strip driver module dedicated to Arduino boards. It can work with tapes with a supply voltage of up to 12 V and a current consumption of up to 3 A. DFRobot DFR0274
zł58.43
24h
Available quantity: 1
Available
RGB LED driver module equipped with ATtiny1616 microcontroller and STEMMA QT connector. It uses a 3.3V/5V voltage level converter and allows you to control the popular Neopixel LEDs. Adafruit 5766
zł37.81
24h
Available quantity: 2
Available
Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006
zł18.12
24h
Available quantity: 2
Available
Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050
zł59.13
24h
Available quantity: 3
Available
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002