STEVAL-ILL009V1

RGB LED strip controller with an infrared receiver. Enables remote control of multi-colored strips with diodes type 3528 and 5050 powered with voltage of 12 V using an IR remote control

The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. COM-13705

Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050

Bright white SMD 3528 LED module. DFRobot DFR0438

WiFi controller dedicated to LED strips based on addressed diodes, including the popular WS2812, WS2813 and WS2815. SP108E

RGB LED strip driver module dedicated to Arduino boards. It can work with tapes with a supply voltage of up to 12 V and a current consumption of up to 3 A. DFRobot DFR0274

RGB LED driver module equipped with ATtiny1616 microcontroller and STEMMA QT connector. It uses a 3.3V/5V voltage level converter and allows you to control the popular Neopixel LEDs. Adafruit 5766

I2C LED driver chip has the ability to PWM each individual LED in a 16x9 grid. Adafruit 2946

An educational kit that teaches the basics of electronics with an LED that changes colors in response to the lack of light. The kit includes all the necessary components, including a light sensor, a color LED, and a USB cable, and detailed instructions and teaching materials from Kitronik make assembly and introducing the topic of electronics into teaching easy. Kitronik 2184

LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653

KAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector

A set of elements that allows you to build an economical lamp powered from a mains socket using a standard micro USB charger. In this version, a dedicated board is used, which makes the set more aesthetic and easier to assemble. Kitronik 2161

Module with RGB LED, adapted to operate with a voltage of 5 V. Ideal for applications such as decorative lighting, visual effects or microcontroller projects

Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006

Controller with 5 m RGB LED strip (10 LEDs per meter). The LEDs are mounted on a flexible white PCB. Communication is via the Grove interface. Seeed Studio 104020005

This tiny microcontroller card connector plugs into your computer\'s USB port, allowing you to power and control your NeoPixel (SK6812, WS2812) or DotStar (AP102) LEDs without soldering or complicated wiring.