

zł43.08 tax excl.
This tiny microcontroller card connector plugs into your computer's USB port, allowing you to power and control your NeoPixel (SK6812, WS2812) or DotStar (AP102) LEDs without soldering or complicated wiring.
Description
This small microcontroller card connector plugs into your computer's USB port and can power sounds from NeoPixel (SK6812, WS2812, etc) or DotStar (e.g. AP102) LED without soldering or complex wiring. The SAMD21 chip on the board has 32 KB of SRAM, supports thousands of pixels. It works with Arduino, CircuitPython, or Windows 11 with built-in dynamic light control. At the end is a screw terminal block that can accept solid or solid core wires from 26 to 18 AWG with four ports: 5V power, data, clock and ground. For DotStars, switch the "input" side of your LEDs to the 4 buffers. For NeoPixels, you can have one or two strands, with the second range using the clock pin as a data generator.
Features
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
RGB LED driver module equipped with ATtiny1616 microcontroller and STEMMA QT connector. It uses a 3.3V/5V voltage level converter and allows you to control the popular Neopixel LEDs. Adafruit 5766
LED adapters that allow easy control of LEDs (dimming, flickering, pulsing) in Tiny FX based projects. They feature AVX 9276 connectors and built-in 33Ω resistors, eliminating the need for soldering and external components. Compact and durable, they are great for models, LEGO® scenes and light decorations. Pimoroni PIM751
No product available!
Single-color LED strip driver. It allows you to control strips with LEDs powered with voltage from 12 to 24 V using built-in buttons
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
KAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
RGB LED strip driver module dedicated to Arduino boards. It can work with tapes with a supply voltage of up to 12 V and a current consumption of up to 3 A. DFRobot DFR0274
LED and audio controller designed for lighting effects in LEGO® compatible models, dioramas and decorations. It offers six mono channels, one RGB channel, audio amplifier, sensor inputs and a Qw/ST connector – all without the need for soldering. It enables the creation of advanced animations, lighting effects and synchronized audio in a compact form factor. Pimoroni PIM718
A set of elements that allows you to build an economical lamp powered from a mains socket using a standard micro USB charger. In this version, a dedicated board is used, which makes the set more aesthetic and easier to assemble. Kitronik 2161
The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. COM-13705
No product available!
Advanced ESP32-based LED driver board, designed for full compatibility with WLED and xLights. With a wide range of power supply options, ready-made connectors and built-in protection, it is ideal for creating both simple and complex lighting installations, offering convenience and reliability for both amateurs and professionals. Adafruit 6100
Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006
No product available!
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
Compact 5V and 12V LED strip controller, supporting popular addressable models such as WS2812, WS2813 and WS2815. Compatibility with Seeed Studio XIAO boards and support for WLED and ESPHome applications allows easy integration with smart lighting and smart home systems. Thanks to the Grove interface and built-in security, the module is ideal for DIY projects, home automation and interactive lighting installations. Seeed Studio 105100021
No product available!
Compact board for controlling RGB and white LED strips, allowing easy connection without the need for soldering. With WS2811F and N-channel FETs, it supports up to 3A of current per channel, making it ideal for high-current LED strips, but does not support RGBW strips. Adafruit 5888
This tiny microcontroller card connector plugs into your computer's USB port, allowing you to power and control your NeoPixel (SK6812, WS2812) or DotStar (AP102) LEDs without soldering or complicated wiring.