.png)
Light & Motor Driver V1.0 - universal driver for DC motors and LED
ID: 588825
5902186314368
zł40.65
Tax included
zł33.05 tax excl.
Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050
Description
Universal driver for DC and LED motors based on a MOSFET transistor. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. It offers 4 control modes: UART interface, USB, analog input or using Python code. It can be used to control a wide range of devices, including fans, pumps, DC motors, and LED strips up to 5 m in length. Full documentation and application examples are available on the product page.
Features
- Input voltage range: 5V to 24V
- Maximum control current: 10 A
- PWM duty cycle adjustment range: 0 to 255
- PWM frequency adjustment range: 183 Hz to 46 875 Hz
- Number of PWM channels: 1
- Start/Stop button
- Control Mode:
- Adjustment by means of an external potentiometer
- UART interface
- USB communication
- Control via Python code
- USB type C interface
- UART interface: PH2.0-4P
- Connector for external potentiometer
- Mounting hole: 30 x 50 mm, diameter 3.1 mm
- Dimensions: 37 x 57mm
Kit contains
- Light & Motor Driver V1.0
- Gravity cable 4-pin
588825
Data sheet
- Output current
- 10A
- Number of channels
- 1
- Supply voltage min
- 5 V
- Supply voltages max
- 24 V
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Motor with 20 mm diameter and 44 mm length, 100:1 metal gear, 12 V operating voltage, 0.08 A to 1.6 A power consumption, 140 RPM speed and 6.1 kg*cm maximum torque. Pololu 3490
zł142.00
Delivery date unknown
No product available!
Motor with 37 mm diameter and 57 mm length, 100:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 100 RPM speed and 34 maximum torque. Pololu 4745
zł163.93
Delivery date unknown
No product available!
DC motor equipped with a plastic gear 48:1 with a cut shaft on both sides and an additional shaft for connecting an encoder
zł4.75
24h
Available quantity: 59
Available
Other products in the same category (16)
Module with 2-channel DC motor driver. It allows you to control the drive with a supply voltage from 3 to 11 V and a current of 1.2 A (1.5 A instantaneous). I2C communication. SparkFun ROB-15451
zł112.13
3 weeks
No product available!
Module with 2-channel driver for DC motors L298P. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020093
zł81.54
24h
Available quantity: 1
Available
Module with TB6612FNG DC motors dual driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020103
zł54.33
4 weeks
No product available!
Module with two DRV8830 DC motor drivers. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020010
zł62.29
4 weeks
No product available!
The module with the DRV8830 DC motor controller with a maximum current of 1 A. The board is equipped with a screw connector and communicates via the I2C interface. Pimoroni PIM479
Regular pricezł60.70zł48.56
24h
Available quantity: 11
Available
Two-channel DC motor driver powered with the voltage from 2.5 to 12 V with a maximum continuous current of 0.8 A per channel. It can control a bipolar stepper motor
zł4.12
24h
Available quantity: 32
Available
Two-channel driver of direct current (DC) motors with an operating voltage from 6 to 30 V and a maximum continuous current of 20 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD20A
zł154.00
24h
Available quantity: 4
Available
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR
zł111.29
24h
Available quantity: 2
Available
Single-channel DC motor driver with an operating voltage from 10 to 45 V and a continuous current up to 40 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS40B
zł347.38
24h
Available quantity: 9
Available
Two-channel driver for DC motors with an operating voltage from 7 to 45 V and a continuous current of up to 60 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS60
zł842.09
24h
Available quantity: 8
Available
Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A
zł1,162.14
4 weeks
No product available!
Two-channel driver of direct current (DC) motors with a working voltage from 7 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by buttons. Cytron MDDRC10
zł160.40
4 weeks
No product available!
HAT module with TB6612FNG motor driver and PCA9685 PWM driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 4280
zł128.34
24h
Available quantity: 1
Available
Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver
zł75.83
24h
Available quantity: 1
Available
Module with DC motor driver DRV8256E. It can work with motors supplied with the voltage from 4.5 to 48 V and the current consumption up to 1.9 A. Pololu 4038
zł68.06
24h
Available quantity: 2
Available
Module with DC motor driver DRV8256P. It can work with motors supplied with the voltage from 4.5 to 48 V and the current consumption up to 1.9 A. Pololu 4039
zł66.80
4 weeks
No product available!
Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050