Plasma 2350 W - wireless LED strip controller

The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. COM-13705

RGB LED strip driver module dedicated to Arduino boards. It can work with tapes with a supply voltage of up to 12 V and a current consumption of up to 3 A. DFRobot DFR0274

Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050

The PT4110E89E is an advanced step-up LED driver designed to power white LEDs in applications requiring stable current and high energy efficiency. It provides an output current of up to 1.5A at a supply voltage of up to 5.5V, making it an ideal solution for low input voltage LED lighting

RGB LED strip controller with an infrared receiver. Enables remote control of multi-colored strips with diodes type 3528 and 5050 powered with voltage of 12 V using an IR remote control

Module with RGB LED, adapted to operate with a voltage of 5 V. Ideal for applications such as decorative lighting, visual effects or microcontroller projects

LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653

Shield for MAXimator set, 4-digit 7-segment LED display, 2 RGB type WS2812B diodes, STLM20 temperature sensor, two buttons

Compact 5V and 12V LED strip controller, supporting popular addressable models such as WS2812, WS2813 and WS2815. Compatibility with Seeed Studio XIAO boards and support for WLED and ESPHome applications allows easy integration with smart lighting and smart home systems. Thanks to the Grove interface and built-in security, the module is ideal for DIY projects, home automation and interactive lighting installations. Seeed Studio 105100021

I2C LED driver chip has the ability to PWM each individual LED in a 16x9 grid. Adafruit 2946

The Pico-DALI2 module enables the implementation of DALI2 communication in projects based on ESP32-C6-Pico and ESP32-S3-Pico boards. Thanks to its compatibility with the Pico interface, DALI screw terminals, and ready-to-use programming examples, it is well-suited for smart lighting and building automation applications.

A compact ESP32-based LED driver with WiFi and Bluetooth support, designed to work with WLED software. It allows you to control RGB lighting and animations, offers two 5V logic outputs, and a built-in I2S microphone that responds to sound. Power is provided via USB Type-C (5V/4A) with an automatic fuse, ensuring stable operation, and the Stemma QT I2C connector allows for easy connection of additional modules. Adafruit 6314

This tiny microcontroller card connector plugs into your computer\'s USB port, allowing you to power and control your NeoPixel (SK6812, WS2812) or DotStar (AP102) LEDs without soldering or complicated wiring.

An educational kit that teaches the basics of electronics with an LED that changes colors in response to the lack of light. The kit includes all the necessary components, including a light sensor, a color LED, and a USB cable, and detailed instructions and teaching materials from Kitronik make assembly and introducing the topic of electronics into teaching easy. Kitronik 2184

Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006