Grove Temperature & Humidity Sensor - module with TH02 sensor
ID: 1178606
5906623416165
zł64.23
Tax included
zł52.22 tax excl.
Module with temperature and humidity sensor TH02. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020074
Description
Module with a TH02 temperature and humidity sensor, which allows you to measure humidity in the range of 0 to 80% and temperature in the range of 0 to 70 ° C. The sensor is characterized by high reliability and long-term stability. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Temperature measuring range: 0 to 70 ° C
- Temperature measurement error: ± 0.5 ° C
- Humidity measuring range: 0-80% RH
- Humidity measurement error: ± 4.5% RH
- I2C digital interface
- Optimized for long-term stability
- High reliability
- Supply voltage: 3.3 V or 5 V
- Dimensions: 40 x 20 mm
1178606
Data sheet
- Interface
- I2C
- Type of sensor
- TH02
- Power supply voltage
- 3,3 V/5 V
- Sensor type
- Cyfrowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
4-core cable, 20 cm long, terminated on both sides with a Grove plug. Compatible with the interface used in Seeed Studio and M5Stack modules. Seeed Studio 110990027
zł8.87
Delivery date unknown
No product available!
4-core cable, 50 cm long, terminated on both sides with a Grove plug. Compatible with the interface used in the M5Stack modules. M5Stack A034-C
zł14.90
24h
Available quantity: 7
Available
A 4-core cable with a length of 50 cm, both terminated with a Grove plug. Seeed Studio 110990038
zł15.19
Delivery date unknown
No product available!
A 4-core cable with a length of 30 cm, both terminated with a Grove plug. Seeed Studio 110990040
zł10.74
Delivery date unknown
No product available!
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł8.84
24h
Available quantity: 1
Available
Other products in the same category (16)
Temperature sensor based on the DS18B20 system in a water proof measuring probe. Communication via the 1-Wire interface. DFRobot DFR0198
zł26.84
24h
Available quantity: 4
Available
Module with SHT30 temperature and humidity sensor designed for Wemos D1 Mini
zł16.25
4 weeks
No product available!
Module with 3-axis accelerometer ADXL343 and precise temperature sensor ADT7410 dedicated to Feather series boards. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4147
zł62.29
24h
Available quantity: 2
Available
Module with MLX90614-DCC sensor for non-contact temperature measurement in the range from -70℃ to 380℃. I2C communication. DFRobot SEN0206
zł86.48
4 weeks
No product available!
Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł17.90
24h
Available quantity: 416
Available
ST Microelectronics’ STTS22H digital temperature sensor module, featuring a Qwiic connector, offers accuracy from -40°C to 125°C without the need for additional calibration. The sensor consumes only 1.75 µA in single measurement mode, making it ideal for low-power applications, and additional features such as a configurable interrupt pin and the ability to select two I2C addresses increase its versatility. SparkFun SEN-21262
zł31.48
24h
Available quantity: 2
Available
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
zł355.27
24h
Available quantity: 3
Available
The AHT15 is a precise and reliable temperature and humidity sensor, ideal for applications in harsh environmental conditions.
zł17.72
24h
Available quantity: 6
Available
The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555
zł82.45
24h
Available quantity: 2
Available
Thermocouple converter module based on the AD8495 circuit with an analogue output. Adafruit 1778
zł77.79
24h
Available quantity: 2
Available
KAmod Si7021 is a compact module with a digital temperature and humidity sensor, operated via the I2C interface, dedicated to environmental applications. Qwire connectors and the traditional 2.54 mm pitch provide easy integration with various hardware platforms.
zł39.20
24h
Available quantity: 197
Available
A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776
zł31.08
24h
Available quantity: 5
Available
Temperature sensor based on the DS18B20 chip. It is enclosed in a waterproof measuring probe. It has a 2 m cable and communicates via a 1-Wire interface
zł15.95
24h
Available quantity: 9
Available
A compact pressure and temperature module ideal for weather stations, drones, and IoT projects. It offers a measurement range of 300–1100 hPa with ±3 Pa accuracy and temperature measurement with ±1°C precision. With a built-in 3.3V regulator and logic level converter, it works with both 3V and 5V microcontrollers. STEMMA QT/Qwiic connectors make it easy to quickly connect and daisy-chain multiple sensors in a single system. Adafruit 6420
zł24.96
24h
Available quantity: 5
Available
IR Thermometer Evaluation Board - evaluation board with ATmega328 microcontroller and IR thermometer
Evaluation board with an IR thermometer MLX90614. The sensor is connected to the ATmega328 microcontroller working at a voltage of 3.3 V with the Arduino bootloader loaded. SparkFun SEN-10740
zł198.14
3 weeks
No product available!
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C. SparkFun SEN-13905
zł112.74
24h
Available quantity: 2
Available
Module with temperature and humidity sensor TH02. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020074