

zł277.96 tax excl.
Wireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide measurement range of temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992867
Wireless sensor with LoRaWAN network communication. Dedicated to long-distance industrial data acquisition with a wide measurement range of temperature from -40°C to 85°C and humidity from 0 to 100% RH. Used in both outdoor and indoor air quality monitoring applications.
The kit provides the user with an easy process to configure the device in 4 simple steps through the Mate APP, which helps manage the sensors via Bluetooth protocol. This avoids time-consuming setup and allows those with less experience and technical background to quickly get started with the device.
Mate APP is a data visualization and remote device management tool. It makes users acquire and view data on clear interfaces, while checking the status of devices via built-in Bluetooth functionality. In addition, users can set thresholds (for which they need to take action), intervals (to improve battery performance) and set alarms if data is out of safe operating range. The whole thing is a closed device equipped with LoRaWAN wireless communications and a battery, making it a ready-to-implement solution for industrial projects.
The device combines two sensors, making it a comprehensive solution for air quality monitoring. The enclosure provides IP66-compliant protection, and the built-in LoRaWAN communication guarantees a range of 2 to 10 kilometers, depending on environmental conditions, while maintaining lower power consumption during the transmission process. Remote monitoring via Bluetooth can also be beneficial for large-scale deployments, as it provides efficiency by saving time and labor needed to deploy and manage the devices. SenseCAP is supported over various LoRaWAN networks and supports all universal frequency ranges from 863MHz to 928MHz. The frequency plan is disabled by default and will not transmit an RF signal until it is set by the application via Bluetooth when first powered up. It can be changed to other frequency plans at any time. Such rich equipment along with a replaceable battery with up to 10 years of battery life meets a wide range of needs for IoT solutions.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
ireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide light intensity measurement range from 0 to 160000 Lux. Seeed Studio 114992868
Wireless sensor with LoRaWAN network communication. Dedicated to long-distance industrial data acquisition with a wide measurement range of CO2 from 400 to 10000 ppm, temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992869
I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248
Module with a steam sensor. It can be supplied with the voltage of 3.3 V or 5 V. It has an analog output. DFRobot SEN0121
A module with an AHT20 industrial grade temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101990644
The AHT25 is a versatile and precise humidity and temperature measurement module, ideal for consumer electronics and industrial applications.
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4566
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C. SparkFun SEN-13905
Adafruit module with Si7021 temperature and humidity sensor. Sensor Sillicon Labs can measure temperature in the range of -10 ~ 125 ° C, and humidity in the range of 0-100 & RH. The sensor communicates using the I2C interface. Adafruit 3251
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Waveshare BME280 Environmental Sensor
Air humidity and temperature sensor with 1-Wire interface.
Module with temperature and humidity sensor DHT11. It allows you to measure humidity in the range of 20 ... 90% and temperature (0 ... 50 ° C). DFRobot DFR0067
Module with temperature and humidity sensor. It allows you to measure temperature in the range from 5 to 50°C and humidity in the range from 10 to 90%. The module communicates via the I2C interface. SparkFun SEN-11295
Module with a temperature and humidity sensor based on the SHT40 system. It communicates via the I2C interface. SEN0428
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
No product available!
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
Wireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide measurement range of temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992867