STEMMA QT SHT41 Temperature & Humidity Sensor Module
ID: 1186220
5906623431816
zł31.08
Tax included
zł25.27 tax excl.
A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776
Description
Temperature and humidity sensor module based on Sensirion's SHT41 chip. It features high reliability and stability with low power consumption, fast response and noise immunity. It offers a wide measurement range of humidity from 0 to 100% and temperature from -40 to 125°C. It has an accuracy of ±1.8% when measuring relative humidity from 25 to 75% and an accuracy of ±0.2°C when measuring temperature from 0 to 75°C. The module is compatible with both 3.3 V and 5 V controllers and communication is via an I2C interface (STEMMA QT connector). Full documentation is available on the product page.
Features
- Temperature measurement:
- Range: -40 to 125°C
- Resolution: 0.01℃
- Accuracy: ± 0.2°C
- Response time: 2s
- Humidity measurement:
- Range: 0 to 100% RH
- Resolution: 0.01%
- Accuracy: ± 1.8% RH
- Response time: 6 s
- I2C interface (address 0x44)
- Supply voltage: 3.3 V to 5 V
- Resting current: up to 80 nA
Kit contains
- STEMMA QT Sensirion SHT41 Temperature & Humidity Sensor
- 5-pin goldpin connector
1186220
Data sheet
- Interface
- I2C
- Type of sensor
- SHT41
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Temperature and humidity
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
zł5.83
24h
Available quantity: 28
Available
4-wire cable with a length of 100 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4210
zł5.29
24h
Available quantity: 45
Available
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
zł7.50
24h
Available quantity: 5
Available
Other products in the same category (16)
Module with acceleration and rotational speed sensor based on the LSM6DSOX system. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4438
zł61.94
4 weeks
No product available!
A module with an acceleration and rotational speed sensor based on the LSM6DSOX system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C, SPI or I3C interface. Adafruit 4517
zł103.46
24h
Available quantity: 4
Available
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4862
zł40.98
24h
Available quantity: 2
Available
Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810
zł36.85
24h
Available quantity: 3
Available
Module with a digital barometer LPS22. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4633
zł38.50
24h
Available quantity: 2
Available
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 110°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4469
zł581.83
4 weeks
No product available!
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
zł33.63
24h
Available quantity: 4
Available
Hub with Qwiic connectors that allows you to connect several boards to the evaluation kit. There is no built-in control system, but only splits one connector into 3 more. SparkFun BOB-18012
zł10.50
24h
Available quantity: 4
Available
A module with a USB converter - GPIO/ADC/I2C based on the MCP2221A chip. It allows you to connect sensors, displays or PWM drivers to the computer via a 2.54 mm or Stemma QT/Qwiic connector. Adafruit 4471
zł36.35
24h
Available quantity: 7
Available
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5190
zł486.45
24h
Available quantity: 1
Available
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 55°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4407
zł400.03
24h
Available quantity: 2
Available
Air quality sensor module PMSA003I. It allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. Adafruit 4632
zł232.83
24h
Available quantity: 1
Available
Module with a 16-channel GPIO expander with the ability to control LEDs. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4886
zł26.96
24h
Available quantity: 4
Available
Module with acceleration and rotational speed sensor based on the LSM6DSO32 chip. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4692
zł72.24
24h
Available quantity: 2
Available
Module with CO2, temperature and humidity sensor SCD-30. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4867
zł352.97
24h
Available quantity: 1
Available
Module with an ISO1540 bidirectional galvanic isolator. It allows to electrically separate two devices communicating via the I2C interface. Adafruit 4903
zł45.37
4 weeks
No product available!
A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776