.png)
STEMMA QT TMP117 ± 0.1°C High Accuracy I2C Temperature Sensor - module with temperature sensor
ID: 587284
5906623430536
zł63.38
Tax included
zł51.53 tax excl.
Module with sensor TMP117. It enables measurement in the range from –55°C to 150°C with a very high accuracy up to ± 0.1°C. It communicates via the I2C interface. Adafruit 4821
Description
Module with digital temperature sensor TMP117. It enables measurement in the range from –55°C to 150°C with a very high accuracy even up to 0.1°C (the accuracy depends on the measuring range). The system allows you to configure the temperature threshold and generate an interrupt. The module is powered with the voltage from 3 V to 5 V, and communication is via the I2C interface (STEMMA QT connector). Full documentation is available on the product page.
Features
- Measurement range: from –55°C to 150°C
- 16-bit resolution of 0.0078 ° C
- Accuracy:
- ± 0.1°C (max) from –20°C to 50°C
- ± 0.15°C (max) from –40°C to 70°C
- ± 0.2°C (max) from –40°C to 100°C
- ± 0.25°C (max) from –55°C to 125°C
- ± 0.3°C (max) from –55°C to 150°C
- Communication: I2C interface
- I2C address: 0x48
- Programmable operating modes: continuous measurement, one-time measurement and sleep mode
- Programmable thresholds
- Digital shift (correction)
- Supply voltage: 3 V to 5 V
- Dimensions: 25.5 x 17.7 x 4.6 mm
Kit contains
- STEMMA QT TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
- 6-pin goldpin male connector
587284
Data sheet
- Interface
- I2C
- Type of sensor
- TMP117
- Power supply voltage
- 3 - 5 V
- Sensor type
- Temperatury
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Adafruit 3595
zł39.19
24h
Available quantity: 2
Available
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł12.35
24h
Available quantity: 3
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.53
Delivery date unknown
No product available!
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.14
24h
Available quantity: 25
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł13.74
Delivery date unknown
No product available!
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł97.71
24h
Available quantity: 1
Available
Other products in the same category (16)
Available
Waterproof temperature sensor adapted to work with Sonoff TH10 / TH16
zł23.62
24h
Available quantity: 10
Available
A module with a temperature sensor based on the absorption of infrared radiation. Enables non-contact measurement. modTMP006
zł51.82
4 weeks
No product available!
MAX31865-based module designed for use with PT1000 RTD temperature sensors in 2-, 3- or 4-wire configurations. SPI communication enables connection to microcontrollers, while the 3.3 V regulator and logic level shifting provide compatibility with 5 V systems. PT1000 sensor is not included. Adafruit 3648
zł83.71
24h
Available quantity: 4
Available
LM35 analog temperature sensor module for Arduino. DFRobot DFR0023
zł16.29
24h
Available quantity: 2
Available
Gravity: DS18B20 Temperature Sensor is a module with a temperature sensor compatible with Arduino boards. The module can be supplied with 3.3-5V voltage and measures the temperature in the range -55 ~ 125 ° C. DFRobot DFR0024
zł25.89
24h
Available quantity: 4
Available
Module with MLX90614-DCI sensor for non-contact temperature measurement in the range from -70℃ to 270℃. I2C communication. DFRobot SEN0263
zł359.76
4 weeks
No product available!
Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł17.90
24h
Available quantity: 382
Available
High temperature measuring kit. It consists of a signal conversion module with a range of -270°C to 1372°C and a K-type thermocouple probe with a range of up to 800°C. I2C communication DFRobot DFR0558
zł126.64
4 weeks
No product available!
Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.
zł13.90
24h
Available quantity: 290
Available
Non-contact temperature sensor. Used to measure the infrared intensity of an object to calculate the surface temperature without a contact point in the range -70 ... 380 ° C. DFRobot SEN0256
zł415.47
24h
Available quantity: 1
Available
Non-contact temperature sensor with a measuring range from -70 to 380°C. It uses infrared waves and has a current output. DFRobot SEN0264
zł413.49
4 weeks
No product available!
Temperature sensor based on the DS18B20 system in a water proof measuring probe. Communication via the 1-Wire interface. DFRobot DFR0198
zł26.95
24h
Available quantity: 7
Available
A set with a temperature sensor based on the DS18B20 system in the form of a waterproof measuring probe, a sensor adapter and a cable. Communication via the 1-Wire interface. DFRobot KIT0021
zł26.92
24h
Available quantity: 1
Available
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a PCC connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16294
zł146.78
24h
Available quantity: 1
Available
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a screw connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16295
zł153.41
24h
Available quantity: 2
Available
Module with sensor TMP117. It enables measurement in the range from –55°C to 150°C with a very high accuracy up to ± 0.1°C. It communicates via the I2C interface. Adafruit 4821