![Main view Main view](https://kamami.pl/69927-large_default/module-with-lm35-temperature-sensor.jpg)
![Main view Main view](https://kamami.pl/69927-large_default/module-with-lm35-temperature-sensor.jpg)
zł17.65 tax excl.
LM35 analog temperature sensor module. It allows you to measure the temperature in the range from 0°C to 100°C with a resolution of 0.5°C
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with LM35 sensor, which is used to measure temperature in the range from 0°C to 100°C with a resolution of 0.5°C. It has an analogue voltage output that changes linearly by 10 mV/°C. The module can be connected to the ADC input of any microcontroller and the temperature value can be easily read. It is equipped with an XH2.54 connector and two mounting holes.
Data sheet
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
No product available!
Module with a DS18B20 temperature sensor with a measuring range from -55 to 125°C. It communicates via the 1-wire interface
Temperature sensor based on the DS18B20 system in a water proof measuring probe. Communication via the 1-Wire interface. DFRobot DFR0198
The module with the MCP9600 amplifier is designed to work with the thermocouple type K, J, T, N, S, E, B and R. It has a screw connection and communicates via the I2C interface. Pimoroni PIM437
No product available!
Module for high temperature measurement with a range from -200°C to 700°C dedicated to a probe with a K-type thermocouple. Communication via SPI. SparkFun SEN-13266
A set with a temperature sensor based on the DS18B20 system in the form of a waterproof measuring probe, a sensor adapter and a cable. Communication via the 1-Wire interface. DFRobot KIT0021
Temperature sensor based on a DS18B20 chip replacement. It is enclosed in a waterproof measuring probe. It has a 2 m cable and communicates via a 1-Wire interface
Module with temperature and humidity sensor TH02. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020074
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a PCC connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16294
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C. SparkFun SEN-13905
Module with SHT30 temperature and humidity sensor designed for Wemos D1 Mini
A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027
Module with DHT20 sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80 ℃. Seeed Studio 101020932
The module with the MCP9600 amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020594
Module with a DS18B20 temperature sensor with a measuring range from -55 to 125°C. It communicates via the 1-wire interface
Module with digital temperature sensor TMP102. It enables temperature measurement in the range from –40°C to 125°C with an accuracy of 0.5°C. The system communicates via the I2C interface. SparkFun SEN-16304
The Pmod TMP3 is an ambient temperature sensor built around the Microchip TCN75A. Users may configure the output through I2C to up to 12 bits of resolution as well as setting a trigger to occur when a user defined temperature threshold is reached.. Digilent 410-287
No product available!
LM35 analog temperature sensor module. It allows you to measure the temperature in the range from 0°C to 100°C with a resolution of 0.5°C