Gravity: I2C High Temperature Sensor - K-type thermocouple temperature measurement module (800°C)
ID: 572235
5902186313811
zł126.64
Tax included
zł102.96 tax excl.
High temperature measuring kit. It consists of a signal conversion module with a range of -270°C to 1372°C and a K-type thermocouple probe with a range of up to 800°C. I2C communication DFRobot DFR0558
Description
High temperature kit with K-type thermocouple. Enables measurement in a very wide temperature range with a high resolution of 0.25°C with a small measurement error of 2°C. The set consists of a signal conversion module with a measuring range of -270°C to 1372°C and a K-type thermocouple probe with a measuring range of up to 800°C. Temperature measurement with the probe is based on the thermoelectric effect: the probe generates a small voltage proportional to the temperature, which is processed by a dedicated module with the MAX31855K system. The temperature is read via the I2C interface. The Wiki page offers a user manual and a sample program for Arduino and Raspberry Pi.
Features
Signal Amplification Conversion Module
- Supply voltage (VCC): 3.3 V to 5.5 V
- Probe: K type thermocouple
- Temperature range: -270°C to 1372°C
- Resolution: 0.25°C (14 bit)
- Error: ± 2 ° C (-200°C to 700°C), ± 4 ° C (700°C to 1350°C)
- Interface: Gravity I2C 3.3V
- Dimensions: 44 x 22 mm
Armored K-Type Thermocouple Probe
- Temperature Range: up to 800 °C
- Error: ≤ ±2.5°C
- Wire Length: 1.5m
- Probe Length: 50mm
- Probe Diameter: Φ4mm
- Features: Waterproof, Corrosion Resistant (Weak Acid or Alkali Resistant, Rustproof), High Temperature Resistance
Kit contains
- Signal Amplification Conversion Module
- Armored K-Type Thermocouple Probe
- Gravity-4P I2C/ UART Sensor Wire
572235
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Termopara
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 57
Available
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 74
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 90
Available
Other products in the same category (16)
Module with a digital temperature sensor PCT2075. It enables measurement in the range from -25 to 100°C with an accuracy of ±1°C. Communicates via I2C. Adafruit 4369
zł34.08
24h
Available quantity: 3
Available
Analog PT1000 temperature sensor with a wide measurement range from -50°C to 300°C. High sensitivity allows for quick response to temperature changes. It is an excellent choice for many industrial applications. Seeed Studio 314010819
zł54.66
4 weeks
No product available!
Temperature sensor based on the DS18B20 system in a water proof measuring probe. Communication via the 1-Wire interface. DFRobot DFR0198
zł27.69
24h
Available quantity: 3
Available
The AM2301A temperature and humidity sensor is designed to measure in a variety of environmental conditions. It offers a measuring range of temperature from -40 to +80 °C and humidity from 0 to 100%RH. AM2301A
zł19.10
4 weeks
No product available!
Board with a temperature sensor DS18B20 designed for modules ESP8266, ESP-01 and ESP-01S
zł9.00
24h
Available quantity: 9
Available
A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027
zł26.38
24h
Available quantity: 3
Available
Module with a DS18B20 temperature sensor with a measuring range from -55 to 125°C. It communicates via the 1-wire interface
zł14.45
24h
Available quantity: 1
Available
Available
Module with an analog temperature sensor in the form of a thermistor. Equipped with an XH2.54 connector
zł7.61
24h
Available quantity: 11
Available
Thermocouple converter module based on the AD8495 circuit with an analogue output. Adafruit 1778
zł77.79
24h
Available quantity: 2
Available
RS485 Multi-Depth Sensor for Soil Moisture, Temperature, and EC Measurement - Seeed Studio 101990982
Seeed Studio 101990982 is a professional RS485 soil sensor that enables simultaneous measurement of moisture, temperature, and electrical conductivity at four different depths. With its robust design and IP68 protection, it is suitable for long-term applications in agriculture, greenhouses, and environmental monitoring, providing reliable data for irrigation and crop optimization.
zł1,722.34
4 weeks
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
zł357.75
24h
Available quantity: 1
Available
Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.
zł13.90
24h
Available quantity: 398
Available
The AM2315C is an advanced packaged temperature and humidity sensor offering easy integration with microcontrollers thanks to its 2.5V-5.5V power supply and standard I2C interface, providing greater resistance to external conditions than typical SHT sensors, with measurement accuracy of ±2% RH and ±0.3°C
zł79.00
24h
Available quantity: 23
Available
IR Thermometer Evaluation Board - evaluation board with ATmega328 microcontroller and IR thermometer
Evaluation board with an IR thermometer MLX90614. The sensor is connected to the ATmega328 microcontroller working at a voltage of 3.3 V with the Arduino bootloader loaded. SparkFun SEN-10740
zł198.14
3 weeks
No product available!
LHT52 Indoor LoRaWAN Sensor US915 – air temperature and humidity sensor for LoRaWAN, IP52 - Seeed...
LHT52 Indoor LoRaWAN Air Temperature and Humidity Sensor US915 Seeed Studio 101990984 is a wireless air temperature and humidity sensor designed for smart home systems, offices, and industrial applications. Thanks to battery power, data logging, and LoRaWAN compatibility, it is suitable for environmental monitoring, building automation, and precision agriculture.
zł149.83
4 weeks
No product available!
High temperature measuring kit. It consists of a signal conversion module with a range of -270°C to 1372°C and a K-type thermocouple probe with a range of up to 800°C. I2C communication DFRobot DFR0558