STEMMA QT MCP9808 High Accuracy I2C Temperature Sensor - module with a temperature sensor
ID: 587250
5906623430253
zł26.38
Tax included
zł21.45 tax excl.
A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027
Description
A module with a high precision temperature sensor based on the MCP9808system. It offers a high accuracy of ± 0.25°C in the range from -40 to 125°C with a resolution of 0.0625°C. The module is compatible with 3.3 V and 5 V controllers, and communication is via the I2C interface (STEMMA QT connector). The bus address can be modified with three jumpers, which allows you to choose one of the 8 available addresses. Full documentation is available on the product page.
Features
- Accuracy: 0.25°C in the range from -40°C to 125°C
- Resolution 0.0625°C
- Up to 8 sensors on one I2C bus
- I2C address configuration jumpers
- Power and logic voltage range from 2.7 V to 5.5 V
- Working current: 200 μA (typical)
- Dimensions: 25.4 x 17.6 x 4.6 mm
Kit contains
- STEMMA QT MCP9808 High Accuracy I2C Temperature Sensor
- 6-pin goldpin male connector
587250
Data sheet
- Interface
- I2C
- Type of sensor
- MCP9808
- Power supply voltage
- 2.7..5.5V
- Sensor type
- Temperatury
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł10.39
Delivery date unknown
No product available!
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.35
24h
Available quantity: 19
Available
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.10
24h
Available quantity: 25
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.96
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller in the form of a USB dongle. Equipped with Stemma QT connector, RGB NeoPixel diode, boot and reset button. Adafruit 5056
zł39.58
24h
Available quantity: 3
Available
Other products in the same category (16)
The module with the MCP9600 amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020594
zł80.27
4 weeks
No product available!
The module with the MCP96L01 amplifier designed to work with a thermocouple type K, J, T, N, S, E, B, or R. It has a screw connection for connecting a thermocouple and communicates via I2C. Adafruit 5165
zł86.57
24h
Available quantity: 3
Available
Module with 3-axis accelerometer ADXL343 and precise temperature sensor ADT7410 dedicated to Feather series boards. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4147
zł62.29
24h
Available quantity: 2
Available
Module with a non-contact IR temperature sensor. It allows the measurement in the range from -70 to 380°C and communicates via the I2C interface. Waveshare Infrared Temperature Sensor
zł61.87
24h
Available quantity: 1
Available
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 35°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020895
zł171.47
24h
Available quantity: 1
Available
Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556
zł25.76
24h
Available quantity: 6
Available
ST Microelectronics’ STTS22H digital temperature sensor module, featuring a Qwiic connector, offers accuracy from -40°C to 125°C without the need for additional calibration. The sensor consumes only 1.75 µA in single measurement mode, making it ideal for low-power applications, and additional features such as a configurable interrupt pin and the ability to select two I2C addresses increase its versatility. SparkFun SEN-21262
zł31.48
24h
Available quantity: 2
Available
Module for high temperature measurement with a range from -200°C to 700°C dedicated to a probe with a K-type thermocouple. Communication via SPI. SparkFun SEN-13266
zł92.08
24h
Available quantity: 2
Available
Module with SHT30 temperature and humidity sensor designed for Wemos D1 Mini
zł16.25
4 weeks
No product available!
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a PCC connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16294
zł146.78
24h
Available quantity: 1
Available
Module with a temperature sensor DS18B20 designed for Wemos D1 Mini
zł9.85
24h
Available quantity: 2
Available
Temperature sensor in the form of a HT-NTC100K thermistor on a 1 m cable. Designed for 3D printers
zł5.40
24h
Available quantity: 40
Available
Thermocouple converter module based on the AD8495 circuit with an analogue output. Adafruit 1778
zł77.79
24h
Available quantity: 2
Available
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
zł815.50
3 weeks
No product available!
IR Thermometer Evaluation Board - evaluation board with ATmega328 microcontroller and IR thermometer
Evaluation board with an IR thermometer MLX90614. The sensor is connected to the ATmega328 microcontroller working at a voltage of 3.3 V with the Arduino bootloader loaded. SparkFun SEN-10740
zł198.14
3 weeks
No product available!
The AM2301A temperature and humidity sensor is designed to measure in a variety of environmental conditions. It offers a measuring range of temperature from -40 to +80 °C and humidity from 0 to 100%RH. AM2301A
zł19.48
24h
Available quantity: 10
Available
A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027