Gravity: I2C Non-contact IR Temperature Sensor - module for non-contact temperature measurement with MLX90614-DCI sensor

Module with a temperature sensor DS18B20 designed for Wemos D1 Mini

Temperature sensor based on a DS18B20 chip replacement. It is enclosed in a waterproof measuring probe. It has a 2 m cable and communicates via a 1-Wire interface

Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.

Evaluation board with an IR thermometer MLX90614. The sensor is connected to the ATmega328 microcontroller working at a voltage of 3.3 V with the Arduino bootloader loaded. SparkFun SEN-10740

ST Microelectronics’ STTS22H digital temperature sensor module, featuring a Qwiic connector, offers accuracy from -40°C to 125°C without the need for additional calibration. The sensor consumes only 1.75 µA in single measurement mode, making it ideal for low-power applications, and additional features such as a configurable interrupt pin and the ability to select two I2C addresses increase its versatility. SparkFun SEN-21273

Adafruit Universal Thermocouple Amplifier MAX31856 is an amplifier module for thermocouples. It was based on the MAX31856 chip. The module is fitted with K, J, N, R, S, T, E or B thermocouples. The SPI interface is used for communication. Adafruit 3263

A module with a temperature sensor based on the absorption of infrared radiation. Enables non-contact measurement. modTMP006

Waterproof temperature sensor adapted to work with Sonoff TH10 / TH16

A module with a temperature and humidity sensor based on the AHT20 system. It communicates via the I2C interface. DFRobot SEN0527

The KAmod BMP280 contains a precise BMP280 sensor manufactured by Bosch Sensortec, which enables the measurement of atmospheric pressure and temperature. All key signals of the miniature BMP280 sensor are routed on the module board, facilitating its use in modular applications. Communication is carried out via SPI or I2C interfaces equipped with voltage level translation circuits.

Module with OTP-538U non-contact temperature sensor. The board is equipped with a Grove connector and has analog outputs. Seeed Studio 101020062

Module with 3-axis accelerometer ADXL343 and precise temperature sensor ADT7410 dedicated to Feather series boards. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4147

SEN-13314

The HTC-2 is a reliable and functional weather station with temperature and humidity measurement, clock, alarm, and memory for min/max values, ideal for home or office use.

A module with a high precision temperature sensor based on the MCP9808 chip. It allows for measurements with an accuracy of ±0.25°C and communicates via the I2C interface. DFRobot SEN0435

DS18B20 compatible temperature sensor in a waterproof stainless steel housing, RoHS