

Gravity: The high temperature sensor is a sensor based on the PT100 probe known for its wide range of applications in the industry. Thanks to the PT100 probe, the module can measure temperatures up to 350 ° C. The module returns data via the analog interface. The module supply voltage should be in the range of 3.3 ... 5.5 V. The temperature readout is characterized by high accuracy and is 0.5 ° C.
The module can be used in projects that require measurement of much higher temperatures than those supported by popular temperature sensors (above 125 ° C). An example of application can be the measurement of fluid temperature in the automation system.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
PT100 temperature sensor in a stainless steel housing, RoHS
The Pmod TMP3 is an ambient temperature sensor built around the Microchip TCN75A. Users may configure the output through I2C to up to 12 bits of resolution as well as setting a trigger to occur when a user defined temperature threshold is reached.. Digilent 410-287
No product available!
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
LM35 analog temperature sensor module for Arduino. DFRobot DFR0023
A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776
Module with MLX90614-DCI sensor for non-contact temperature measurement in the range from -70℃ to 270℃. I2C communication. DFRobot SEN0263
No product available!
DS18B20 compatible temperature sensor in a waterproof stainless steel housing, RoHS
Board with a temperature sensor DS18B20 designed for modules ESP8266, ESP-01 and ESP-01S
Temperature and humidity sensor module based on the HTS221 chip. Equipped with a STEMMA QT connector, it communicates via an I2C or SPI interface. Adafruit 4535
LM35 analog temperature sensor module. It allows you to measure the temperature in the range from 0°C to 100°C with a resolution of 0.5°C
Energy-saving environmental sensor, enabling precise measurement of temperature in the range from -40℃ to +85℃ and atmospheric pressure from 300 to 1100 hPa. Supports I2C and SPI interfaces, and thanks to the FIFO function allows to minimize energy consumption - even to 0.5 μA in standby mode. Compatible with Arduino, Raspberry Pi and Micro:bit, it is ideal for use in DIY projects, educational projects and weather stations. Seeed Studio 110992164
Seeed Studio 101990982 is a professional RS485 soil sensor that enables simultaneous measurement of moisture, temperature, and electrical conductivity at four different depths. With its robust design and IP68 protection, it is suitable for long-term applications in agriculture, greenhouses, and environmental monitoring, providing reliable data for irrigation and crop optimization.
No product available!
Wireless, precise temperature sensor with high accuracy with built-in recorder. Works with thermoelectric sensors type K, J, T, N, E, B, S and R
Module with MLX90614-DCC sensor for non-contact temperature measurement in the range from -70℃ to 380℃. I2C communication. DFRobot SEN0206
Module with temperature and humidity sensor DHT11. It uses a 1-wire communication interface and has a humidity measurement range from 20 to 90% with an accuracy of 5% and temperature from 0 to 50 ºC with an accuracy of 2 ºC
Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556
ST Microelectronics’ STTS22H digital temperature sensor module, featuring a Qwiic connector, offers accuracy from -40°C to 125°C without the need for additional calibration. The sensor consumes only 1.75 µA in single measurement mode, making it ideal for low-power applications, and additional features such as a configurable interrupt pin and the ability to select two I2C addresses increase its versatility. SparkFun SEN-21273
LHT52 Indoor LoRaWAN Air Temperature and Humidity Sensor US915 Seeed Studio 101990984 is a wireless air temperature and humidity sensor designed for smart home systems, offices, and industrial applications. Thanks to battery power, data logging, and LoRaWAN compatibility, it is suitable for environmental monitoring, building automation, and precision agriculture.
No product available!
Module with DHT20 sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80 ℃. Seeed Studio 101020932
Gravity: The high temperature sensor is a sensor based on the PT100 probe and adapted to very high temperatures (30-350 ° C). The module is powered by 3.3 ... 5.5V voltage. DFRobot SEN0198