![Grove SPDT Relay - module with 30A relay Grove SPDT Relay - module with 30A relay](https://kamami.pl/47981-large_default/grove-spdt-relay-module-with-30a-relay-103020012.jpg)
![Grove SPDT Relay - module with 30A relay Grove SPDT Relay - module with 30A relay](https://kamami.pl/47981-large_default/grove-spdt-relay-module-with-30a-relay-103020012.jpg)
zł44.59 tax excl.
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with the SLA-05VDC-SL-C relay with a load of up to 30 A. It allows you to control high-power devices using, for example, a microcontroller with a voltage of 5 V. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension . The module is controlled by digital inputs and is powered by 5 V. Full documentation of the module with examples of use is available on the product page.
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
4-core cable, 20 cm long, terminated on both sides with a Grove plug. Compatible with the interface used in Seeed Studio and M5Stack modules. Seeed Studio 110990027
No product available!
A 4-core cable with a length of 30 cm, both terminated with a Grove plug. Seeed Studio 110990040
No product available!
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
Module with 32 12 V relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL320001
12V relay module with a radio receiver in a set with a remote control operating at 433 MHz.
No product available!
Module with one 5 V relay with a maximum switching current of 10 A. It communicates via a USB interface and does not require additional power supply. Numato Lab NLRL1001-A
The module with 4 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 10 A or a voltage of 28 V DC and a current of 10 A. M5Stack U097
Module with 4 SSR relays with a load of up to 3 A. The board communicates via the Ethernet interface. Numato Lab 4ETHSSR001-AC
No product available!
Module with 2 5 V relays with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL001
No product available!
Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
Module with MOSFET transistor, 5-36 V, 20 A, switching frequency 1 kHz. DFRobot DFR0457
I/O module supporting Modbus RTU via USB and RS485 and Modbus TCP via Ethernet. It has 4 built-in SPST relays and 8 digital inputs, 8 digital outputs and 4 analog inputs. Provides a flexible DIN rail mounting system. Numato Lab NLRXE002-A
No product available!
ModRL01 module with 10A/250VAC (10A/24VDC) relay, supply of 5 V load relay coil, additional control circuit, protected overvoltage control
Module with 8 relays 12 V with a maximum switching current of 7 A. Numato Lab RL40004
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano
The module contains a 5 V relay with a maximum current of 10 A (250 VAC) and optoisolated inputs, and with jumpers it is possible to select high or low switching. The module is equipped with screw connectors
Module with 16 relays with a maximum switching current of 7 A. It communicates via a USB interface. Numato Lab RL160001-24
Module with 32 relays 12 V with a maximum switching current of 7 A. Numato Lab RL320003
No product available!
Extension module designed for home automation projects compatible with Raspberry Pi. The board is equipped with a 24 V 2 A relay, three buffer inputs, three sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM487
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012