Grove 315MHz Simple RF Link Kit - 315MHz radio transmitter and receiver
ID: 583258
5906623416028
zł50.26
Tax included
zł40.86 tax excl.
A set with a radio transmitter and receiver operating at 315 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 113020001
Description
A set with a radio transmitter and receiver operating at 315 MHz. It allows communication in rooms up to 40 m and up to 100 m in open space. For communication, it is recommended to use the VirtualWire library, i.e. the Arduino library, which provides the function of sending short messages without addressing, retransmitting or confirming using ASK (amplitude shift keying). The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension.. The module communicates via a digital interface and is supplied with the voltage of 5 V. It can be used, for example, as a communication module for a remote-controlled gate or alarm. Full documentation of the module with examples of use is available on the product page.
Features
- Frequency: 315 MHz
- Range: 40 m (indoor), 100 m (open space)
- Receiver sensitivity -105 dBm
- Transmitter power: 15 mW
- Operating Mode: ASK
- Digital interface
- VirtualWire library recommended
- Supply voltage: 5V
- Current consumption: 5 mA
- Dimensions: 20 x 20 x 20 mm
- Weight: 9 g
Kit contains
- Transmitter module
- Receiver module
- Grove cable
583258
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 23
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 29
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 21
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 104020002
zł62.15
24h
Available quantity: 2
Available
Other products in the same category (16)
A sensor that detects the oxygen concentration. Equipped with a factory calibrated probe. It communicates via the UART interface or the analog output. Seeed Studio 101020912
zł539.04
4 weeks
No product available!
Module with LCD display 16x2 characters with white text and blue backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020111
zł28.91
24h
Available quantity: 1
Available
Module with a dust sensor PPD42NS. The board is equipped with a Grove cable and communicates via the PWM interface. Seeed Studio 101020012
zł62.79
4 weeks
No product available!
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
zł52.95
24h
Available quantity: 2
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
zł39.21
24h
Available quantity: 2
Available
Module with a microswitch (limit switch). The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł25.42
24h
Available quantity: 1
Available
Grove starter kit dedicated to Raspberry Pi minicomputers. Contains basic sensors and modules necessary for learning programming and electronics. Seeed Studio 110020169
zł261.47
24h
Available quantity: 1
Available
Blue mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070022
zł11.54
24h
Available quantity: 2
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
zł94.33
24h
Available quantity: 4
Available
Module with LSM6DS3 sensor that combines a 3-axis accelerometer and a 3-axis gyroscope. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020012
zł56.22
24h
Available quantity: 1
Available
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł35.89
24h
Available quantity: 1
Available
Grove adapter for 3.5mm screw connector. Seeed Studio 103020007
zł8.54
24h
Available quantity: 1
Available
Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020077
zł173.93
24h
Available quantity: 1
Available
A set with a prototype breadboard equipped with a Grove connector. Seeed Studio 103020232
zł20.14
4 weeks
No product available!
Module with a MLX90640 thermal imaging camera with a 32x24 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020142
zł786.54
4 weeks
No product available!
Module with 6-position DIP switch. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020043
zł23.12
4 weeks
No product available!
A set with a radio transmitter and receiver operating at 315 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 113020001