

Module with a purple LED diode. The diode was soldered in such a way that it could be bent in any direction. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital interface and is powered by 5 V. Full documentation of the module with examples of use is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
Module with blue LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030010
Module with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-G
This is the second version of the Flora NeoPixels, which runs at at \'high speed\' 800KHz communication. Adafruit 1260
LED display module with three LEDs in red, yellow and green. Perfect to be used as a traffic light
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
Adafruit 2226
The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
Kitronik 2726 is a lilac LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
Gravity: Digital LED String Lights (Warm White) consist of a series of warm white LEDs. It is powered by a voltage of 2.5 ... 5 V and consists of 40 LEDs placed on a 4-meter cable. DFRobot DFR0448
No product available!
Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005
Module with RGB LED, adapted to operate with a voltage of 5 V. Ideal for applications such as decorative lighting, visual effects or microcontroller projects
Module with white LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030009
Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316
An advanced LED module for the BBC micro:bit, featuring 60 individually addressable ZIP LEDs, plus a MEMS microphone and piezo speaker to create light and sound effects. The module also has an I2C-controlled real-time clock, and its integrated edge connector and AA battery holder means it\'s ready to go as soon as you plug in your micro:bit. Kitronik 5672
Module with RGB LED diode that allows you to control individual colors using PWM signals. It has an XH2.54 connector
Kitronik 2712 is a red LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
Module with a purple LED diode. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020002