M5Stack RGB Unit - module with three RGB LEDs

The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243

Kitronik 2726 is a lilac LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.

A module dedicated to projects related to traffic lights and pedestrian crossings. It is fully assembled, which eliminates the need for soldering. Thanks to the shape resembling a real traffic light and three LEDs powered directly from the micro:bit I/O pins, it allows easy programming and expansion of projects with additional traffic lights using radio communication, which allows for the study of traffic management in the city. Kitronik 5642

Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-W

A set of 20 modules with RGB diodes with a diameter of 12.5 mm. The diodes have a 24-bit range of colors. Adafruit 1559

Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-R

Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316

KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1

Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector

RGB diode module. Each color is controlled by individual R, G and B inputs. SparkFun DEV-13735

Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control

Flashlight module using a bright 5000 mCd white LED. Power is supplied by a 12 V N-type battery, which is included in the set. The flashlight is equipped with a slide switch for convenient switching on and off. Kitronik 2114

Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005

Kitronik 2712 is a red LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.

Adafruit 1312

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Adafruit 322