Module with LED (white)

The module is equipped with three RGB SK6812 LEDs. It is designed to work with the M5Stack sets. Communicates via a single-wire digital interface. M5Stack U003

Module with yellow LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-Y

Module with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-G

Flashlight module using a bright 5000 mCd white LED. Power is supplied by a 12 V N-type battery, which is included in the set. The flashlight is equipped with a slide switch for convenient switching on and off. Kitronik 2114

8-segment display module, 4 digits with commas

This is the second version of the Flora NeoPixels, which runs at at \'high speed\' 800KHz communication. Adafruit 1260

RTC DS1307 module with clock dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 2345

Adafruit 1612

The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243

HK Yellow 16 LED Circular Light Board with Lead (28511)

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Adafruit 322

Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-R

Kitronik 2726 is a lilac LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.

Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745

Adafruit 1312

Kitronik 2766 is a yellow LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.