

Base board designed for Raspberry Pi CM4 modules. It is equipped with special connectors to connect CM4 and the outputs of basic interfaces, including USB, micro HDMI, CSI, microSD card slot and expander connector. In addition, the board has a built-in LCD IPS display with a 2.8" touch panel. The module is powered by a USB type C connector and requires a 5 V power supply with a capacity of 2.5 A.
In addition to the base plate, the set includes a port expander that provides interfaces such as an M.2 slot with support for SSD drives or communication modules, as well as an additional 3 USB connectors and a Gigabit Ethernet interface.
The module will prove itself in projects requiring many peripheral devices. Full documentation is available on the product Wiki page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM, 8 GB eMMC and wireless connectivity. Raspberry Pi CM4101008
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM, 16 GB eMMC and wireless connectivity. Raspberry Pi CM4101016
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM, 16 GB eMMC and wireless connectivity. Raspberry Pi CM4102016
No product available!
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM. Raspberry Pi CM4004000
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM and 8 GB eMMC. Raspberry Pi CM4004008
Base board prepared for Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare CM4-IO-BASE-B
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, in addition, there is an RTC chip on the board, as well as a fan and LCD connector. Waveshare CM4-IO-BASE-C
Nano Base Board (A) to miniaturowa, ale w pełni funkcjonalna płytka bazowa do Raspberry Pi Compute Module 5, zaprojektowana z myślą o integracji w kompaktowych urządzeniach. Oferuje wszystkie kluczowe interfejsy, w tym USB 3.2, podwójne MIPI, GPIO 40-pin, a także wsparcie dla zasilania i chłodzenia, co czyni ją wszechstronnym rozwiązaniem do projektów przemysłowych, IoT i systemów wbudowanych.
Kit with base board for Raspberry Pi CM4. Equipped with an LCD display with a touch panel, a 5 MP camera and a set of connectors. Waveshare CM4-DISP-BASE-7A-BOX-EU
No product available!
reTerminal DM is an industrial panel computer with a 10.1-inch IPS touchscreen and Raspberry Pi CM4, equipped with a wide range of wired and wireless interfaces. With its IP65 design, edge AI support, and open development environment, it is used in building automation, energy, logistics, and industrial IIoT systems.
No product available!
Adapter with 40-pin RPi socket and CM3 SODIMM connector. It allows you to connect the Raspberry Pi Zero 2 W minicomputer to the base boards dedicated to CM3 modules. Waveshare Zero-to-CM3-Adapter
No product available!
Base board prepared for Raspberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare Compute Module 4 PoE Board (B)
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal case with a fan, a power supply and a Dual Gigabit Ethernet Base Board. Waveshare CM4-DUAL-ETH-BOX-A-EU
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two cameras with an IMX219 sensor with a resolution of 8 MP. Waveshare CM4-DUAL-CAMERA-BASE
Heatsink designed for mounting on Raspberry Pi CM4 modules. Komaptybilny with base boards Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-HEATSINK-B
No product available!
The kit is based on the Raspberry Pi Compute Module 4 with a 5-inch IPS capacitive touch screen with a resolution of 720 x 1280. Designed for the Embedded Linux application. Seeed Studio 110070048
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Compute Module 4 PoE Board (B). Waveshare CM4-IO-POE-BOX-B
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
No product available!
A kit for building a minicomputer based on the Raspberry Pi CM4. It consists of a metal case and the CM4-NVME-NAS-BASE base board. Waveshare CM4-NVME-NAS-BOX
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Dual ETH Quad RS485 Base Board. Waveshare CM4-ETH-RS485-BOX-B-EU
No product available!
Base board dedicated to Raspberry Pi CM4 modules. Equipped with a 2.8" IPS LCD display and an expander. Waveshare CM4-DISP-BASE-2.8A-Acce-A