zł28.40 tax excl.
Cooling fan designed for mounting on Raspberry Pi CM4 modules. It is equipped with a 4-pin connector compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-FAN-3007-B
Cooling fan designed for mounting on Raspberry Pi CM4 modules. It is equipped with a 4-pin connector compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board.

The fan ensures proper cooling of the CM4 module with much better efficiency than the heat sink. The mounting is carried out by means of 4 holes and screws, and the design provides easy access to the CM4 antenna connector and does not hinder the work with the module in any way.

Manufacturer
Responsible person
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM. Raspberry Pi CM4001000
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4001016
No product available!
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and wireless connectivity. Raspberry Pi CM4101000
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM, 32 GB eMMC and wireless connectivity. Raspberry Pi CM4101032
No product available!
Base board prepared for Rasberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is an RTC system and a fan connector. Waveshare Compute Module 4 PoE Board
PCIe to M.2 key M connector adapter designed to work with Raspberry Pi CM4 modules. It allows you to connect an NVMe SSD with an M.2 connector to the backplane via a PCIe connector. Waveshare PCIe TO M.2 (A)
Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767
PCIe connector adapter to 4 USB 3.2 Gen1 slots designed to work with Raspberry Pi CM4 modules. It allows you to connect devices with a USB connector to the base board via a PCIe connector. Waveshare PCIe TO USB 3.2 Gen1 (B)
Base board prepared for Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare CM4-IO-BASE-B
Cooling fan designed for mounting on Raspberry Pi CM4 modules. It is equipped with a 4-pin connector compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-FAN-3007-12V
Heatsink designed for mounting on Raspberry Pi CM4 modules. Komaptybilny with base boards Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-HEATSINK
100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 2.9 mm
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces. Waveshare CM4-IO-BASE-A
Base board prepared for Raspberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare Compute Module 4 PoE Board (B)
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two RJ45 connectors, three USB 3.2, HDMI, DSI and CSI. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-DUAL-ETH-BASE
No product available!
Adapter with USB and HDMI connectors connected via FFC tape, among others for CM4-IO-BASE base plates. Waveshare USB HDMI Adapter
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 160°. ArduCAM B006605
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 120°. ArduCAM B006604
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 72°. ArduCAM B006603
Base board dedicated to Raspberry Pi CM4 modules. It integrates the PoE circuit, is equipped with an M.2 connector for connecting a 5G / 4G module and isolated industrial RS232, RS485 and CAN interfaces. Waveshare Compute Module 4 PoE 4G Board
Portable game console based on the Raspberry Pi CM4 Lite, equipped with a 2.8" IPS LCD display, battery and speaker. Waveshare GPM28040
No product available!
Cooling fan designed for mounting on Raspberry Pi CM4 modules. It is equipped with a 4-pin connector compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-FAN-3007-B