Mini base board with dual gigabit Ethernet for Raspberry Pi CM5 - Waveshare 30915
ID: 1197747
5902186322141
zł99.40
Tax included
zł80.81 tax excl.
CM5-DUAL-ETH-MINI is a compact base board with a dual Gigabit Ethernet interface, designed for the Compute Module 5. It enables the development of routers, network gateways, and industrial systems with high network throughput and a flexible GPIO interface. Thanks to its rich set of connectors and small dimensions, it is suitable for both prototyping and integration into final products.
Description
Miniature base board with two Gigabit Ethernet ports, designed to work with all variants of the Raspberry Pi Compute Module 5 (CM5 – not included). It allows the use of the CM5 as a power-efficient computer with two independent network interfaces, powered via USB Type-C. The integrated CM5 connector, standard 40-PIN GPIO header, and USB and power connectors enable rapid prototyping and implementation in final solutions. The board also includes a TF card slot (for CM5 Lite versions), BOOT and PSW buttons, a fan connector, and an RTC battery connector.
Features
- Connector compatible with all variants of Raspberry Pi Compute Module 5
- Two RJ45 Ethernet ports 10/100/1000 Mbps
- Ethernet 0: original network port of the CM5
- Ethernet 1: port extended via PCIe (RTL8111H controller)
- USB 3.2 Gen1 Type-A port
- 40-PIN GPIO header compatible with Raspberry Pi HATs
- TF card slot for system boot (for CM5 Lite)
- USB Type-C power port (5 V) with eMMC flashing support
- Fan connector SH1.0 (4-pin, 5 V, with speed sensing and control)
- RTC battery connector (2-pin)
- PSW button for power on/off
- BOOT button for switching to programming mode
- EEPROM_WP, WiFi_DIS, BT_DIS switches
- LED indicators for power (red) and system activity (green)
- Board dimensions: 55 × 68 mm
1197747
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Industrial IoT backplane designed for Raspberry Pi CM. It uses the SIM7600G-H chip for 4G, 3G, 2G communication, and has a built-in 10/100M Ethernet port with PoE function and a 2.4 GHz WiFi module. Waveshare Compute Module PoE 4G Board
zł612.37
4 weeks
No product available!
Industrial IoT backplane for Raspberry Pi CM. It uses the SIM7600G-H chip for 4G, 3G, 2G communication, and has a 10/100M Ethernet port with PoE function and a 2.4 GHz WiFi module. Enclosed in an aluminum housing. Waveshare CM-IO-POE-4G-BOX
zł551.94
4 weeks
No product available!
Portable game console based on Raspberry Pi CM3+ Lite, equipped with LCD IPS 2.8" display, battery and speaker. Waveshare GPM2803P0
zł602.72
4 weeks
No product available!
Base board prepared for Rasberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is an RTC system and a fan connector. Waveshare Compute Module 4 PoE Board
zł238.98
24h
Available quantity: 1
Available
PCIe to M.2 key M connector adapter designed to work with Raspberry Pi CM4 modules. It allows you to connect an NVMe SSD with an M.2 connector to the backplane via a PCIe connector. Waveshare PCIe TO M.2 (A)
zł15.01
4 weeks
No product available!
Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767
zł253.27
24h
Available quantity: 6
Available
PCIe connector adapter to 4 USB 3.2 Gen1 slots designed to work with Raspberry Pi CM4 modules. It allows you to connect devices with a USB connector to the base board via a PCIe connector. Waveshare PCIe TO USB 3.2 Gen1 (B)
zł75.08
24h
Available quantity: 2
Available
Base board prepared for Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare CM4-IO-BASE-B
zł113.82
4 weeks
No product available!
Cooling fan designed for mounting on Raspberry Pi CM4 modules. It is equipped with a 4-pin connector compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-FAN-3007-12V
zł42.84
24h
Available quantity: 8
Available
Heatsink designed for mounting on Raspberry Pi CM4 modules. Komaptybilny with base boards Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-HEATSINK
zł19.57
24h
Available quantity: 278
Available
100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 2.9 mm
zł10.53
24h
Available quantity: 1173
Available
100-pin connector (socket) for Raspberry Pi CM4 modules. 0.4 mm pitch, 1.45 mm height
zł8.63
24h
Available quantity: 686
Available
The kit is based on the Raspberry Pi Compute Module 4 with a 5-inch IPS capacitive touch screen with a resolution of 720 x 1280. Designed for the Embedded Linux application. Seeed Studio 110070048
zł1,249.00
4 weeks
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Compute Module 4 PoE Board. Waveshare CM4-IO-POE-BOX-A
zł320.62
4 weeks
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces. Waveshare CM4-IO-BASE-A
zł84.26
24h
Available quantity: 7
Available
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Compute Module 4 PoE Board (B). Waveshare CM4-IO-POE-BOX-B
zł275.90
24h
Available quantity: 5
Available
CM5-DUAL-ETH-MINI is a compact base board with a dual Gigabit Ethernet interface, designed for the Compute Module 5. It enables the development of routers, network gateways, and industrial systems with high network throughput and a flexible GPIO interface. Thanks to its rich set of connectors and small dimensions, it is suitable for both prototyping and integration into final products.