CM4-POE-UPS-BASE-EN baseboard for Raspberry Pi CM4 modules - Waveshare 22116
ID: 1179264
5906623426584
zł253.16
Tax included
zł205.82 tax excl.
Base board for Raspberry Pi CM4 modules. It integrates the function of an uninterruptible power supply, PoE circuit, it is equipped with connectors for all available interfaces, in addition, there is an RTC system on the board and a fan connector. Waveshare Compute Module 4 PoE Board
Description
The PoE UPS Base Board is the base board for the Raspberry Pi CM4 modules. It is equipped with special connectors for connecting the module and the outputs of all CM4 interfaces, including USB, Ethernet, HDMI, DSI, CSI, 40-Pin GPIO connector compatible with HAT modules. Additionally, the board has a real-time clock (RTC) circuit and a fan connector. It integrates a PoE circuit that allows the set to be powered via an Ethernet cable.
An important element of the board is the function of an uninterruptible power supply (UPS). After connecting three 18650 batteries, it maintains a stable output voltage of 5 V even after the loss of power, which allows the device to continue operating and safely shut down. Full monitoring of the battery condition is possible thanks to the I2C interface. In addition, at the bottom of the board there is an M.2 M Key connector that allows you to connect an NVME SSD disk or communication modules. Full documentation is available on the product page.
Features
- CM4 connector: suitable for all variants of the Raspberry Pi CM4 module (not included)
- Standard 40-pin Raspberry Pi HAT connector
- M.2 M KEY connector (for NVME SSD or communication modules)
- Isolated PoE 802.3af 5V/2.5A power circuit
- Real time clock (RTC) with battery backup
- 2 x HDMI connectors
- 2 x MIPI Camera Connectors
- MIPI display connectors
- Gigabit Ethernet connector supporting PoE HAT
- Built-in USB Hub with 4 USB 2.0 connectors
- USB Type-C connector
- SD card slot for RPI CM4 Lite modules
- 5V/12V PWM fan controller
- M.2 and CM4 status LED
- Power supply from 7 to 36 V
- Dimensions: 175 x 108 mm
1179264
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
zł36.64
24h
Available quantity: 55
Available
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM. Raspberry Pi CM4001000
zł149.00
24h
Available quantity: 3
Available
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4001016
zł199.00
Delivery date unknown
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM and 32 GB eMMC. Raspberry Pi CM4002032
zł249.00
Delivery date unknown
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM and 8 GB eMMC. Raspberry Pi CM4004008
zł269.00
Delivery date unknown
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM, 8 GB eMMC and wireless connectivity. Raspberry Pi CM4104008
zł299.00
Delivery date unknown
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3000 mAh. Samsung INR18650-30Q
zł33.60
24h
Available quantity: 18
Available
Other products in the same category (16)
Advanced carrier board compatible with Raspberry Pi Compute Module 5 (CM5) and Compute Module 4 (CM4), offering support for modules in high-performance and energy-efficient servers. With PoE power supply, rack-mounting capability, and support for up to 20 units in a 1U space, it allows for scaling performance to 80 ARM cores, 160 GB RAM, and 10 TB NVMe storage, meeting needs from IoT projects to advanced cloud systems. BladeTPM-V1-0
zł333.31
2 weeks
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two cameras with an IMX219 sensor with a resolution of 8 MP. Waveshare CM4-DUAL-CAMERA-BASE
zł338.56
24h
Available quantity: 1
Available
reComputer R1035-10 is an industrial IoT computer based on Raspberry Pi CM4 with 8 GB RAM and 32 GB eMMC, equipped with isolated RS485 interfaces, two Ethernet ports with PoE support, and an M.2 NVMe slot. With AI support and wireless communication, it is suitable for automation systems, fleet management, and edge AI applications.
zł958.71
4 weeks
No product available!
reTerminal DM is an industrial panel computer with a 10.1-inch IPS touchscreen and Raspberry Pi CM4, equipped with a wide range of wired and wireless interfaces. With its IP65 design, edge AI support, and open development environment, it is used in building automation, energy, logistics, and industrial IIoT systems.
zł1,722.34
4 weeks
No product available!
Advanced carrier board compatible with Raspberry Pi Compute Module 5 (CM5) and Compute Module 4 (CM4), offering support for modules in high-performance and energy-efficient servers. With PoE power supply, rack-mountability, and support for up to 20 units in a 1U space, it allows for scaling performance to 80 ARM cores, 160 GB RAM, and 10 TB NVMe storage, meeting needs from IoT projects to advanced cloud systems. BladeBasic-V1-0
zł258.58
2 weeks
No product available!
ED-CM4SEN-1208-C is a single board computer with a Raspberry Pi CM4 and a quad-core ARM Cortex-A72 1.5 GHz processor, equipped with eMMC, mPCIe, PCIe, Gigabit Ethernet, and five RS-232 ports. The design with a heatsink and an operating range of -25°C to 60°C allows it to be used in demanding industrial and network projects.
zł750.30
24h
Available quantity: 1
Available
100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 2.9 mm
zł10.53
24h
Available quantity: 1197
Available
Heatsink designed for mounting on Raspberry Pi CM4 modules. Komaptybilny with base boards Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-HEATSINK
zł19.90
24h
Available quantity: 522
Available
PoE HAT (H) is a high-efficiency power supply add-on for Raspberry Pi 5 and Compute Module 5, enabling data transmission and power delivery over a single Ethernet cable in accordance with the IEEE 802.3af/at standard. Thanks to the use of an isolated switching converter and compatibility with the official enclosure, it is suitable for stable and compact integration in network, automation, and remote device management projects.
zł90.56
24h
Available quantity: 10
Available
A kit for building a NAS server based on the Raspberry Pi CM4 module. It has space for mounting two 2.5" SATA drives and an LCD display for monitoring the minicomputer\'s operating status. Waveshare CM4-NAS-Double-Deck (EU)
zł407.86
24h
Available quantity: 5
Available
Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767
zł253.27
24h
Available quantity: 6
Available
Base board dedicated to the Raspberry Pi CM4. It has the dimensions of a CM4 module and is equipped with basic connectors for interfaces. Waveshare CM4-NANO-A
zł58.50
4 weeks
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces. Waveshare CM4-IO-BASE-A
zł81.91
24h
Available quantity: 10
Available
Kit with base board for Raspberry Pi CM4. Equipped with an LCD display with a touch panel, a 5 MP camera and a set of connectors. Waveshare CM4-DISP-BASE-7A-BOX-EU
zł627.87
24h
Available quantity: 2
Available
CM5-NANO-B is a base board for Raspberry Pi Compute Module 5, offering full functionality in a compact form. With support for high-speed interfaces such as USB 3.2, HDMI 4K, PCIe, and MIPI, it serves as an ideal platform for prototyping and deploying embedded systems. The ability to integrate with DSI/CSI, use external cooling, and connect to a Gigabit Ethernet network makes the board well-suited for industrial, IoT, and consumer applications. Variant suitable for CM5 Lite and eMMC versions – the Compute Module 5 itself must be purchased separately.
zł75.41
4 weeks
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a display enclosed in a housing, a power supply and an antenna. Waveshare 13.3inch PiPad C4
zł985.62
4 weeks
No product available!
Base board for Raspberry Pi CM4 modules. It integrates the function of an uninterruptible power supply, PoE circuit, it is equipped with connectors for all available interfaces, in addition, there is an RTC system on the board and a fan connector. Waveshare Compute Module 4 PoE Board