Base board designed for Raspberry Pi CM4 modules. It is equipped with special connectors to connect CM4 and the outputs of basic interfaces, including USB, HDMI, CSI, microSD card slot and a 40-pin connector dedicated to HAT modules. In addition, the board has a built-in IPS LCD display with a 5" touch panel. The module is powered by a USB type C connector.

In addition, the user has at his disposal interfaces such as an M.2 slot with support for SSD drives or communication modules, as well as a Gigabit Ethernet interface, a battery slot for holding the RTC clock and a fan connector. The module will prove itself in projects requiring many peripheral devices. Full documentation is available on the product Wiki page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM, 8 GB eMMC and wireless connectivity. Raspberry Pi CM4101008
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4002016
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM, 16 GB eMMC and wireless connectivity. Raspberry Pi CM4102016
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM. Raspberry Pi CM4004000
Base board dedicated to Raspberry Pi CM4 modules. Equipped with a 2.8" IPS LCD display and an expander. Waveshare CM4-DISP-BASE-2.8A-Acce-A
Base board prepared for Raspberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare Compute Module 4 PoE Board (B)
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two RJ45 connectors, three USB 3.2, HDMI, DSI and CSI. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-DUAL-ETH-BASE
No product available!
Adapter with USB and HDMI connectors connected via FFC tape, among others for CM4-IO-BASE base plates. Waveshare USB HDMI Adapter
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 160°. ArduCAM B006605
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 120°. ArduCAM B006604
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 72°. ArduCAM B006603
Base board dedicated to Raspberry Pi CM4 modules. It integrates the PoE circuit, is equipped with an M.2 connector for connecting a 5G / 4G module and isolated industrial RS232, RS485 and CAN interfaces. Waveshare Compute Module 4 PoE 4G Board
No product available!
Portable game console based on the Raspberry Pi CM4 Lite, equipped with a 2.8" IPS LCD display, battery and speaker. Waveshare GPM28040
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with RJ45, USB 3.2, HDMI, DSI, CSI connectors and M.2 B KEY socket for the 4G/5G module. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-DUAL-ETH-4G/5G-BASE
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two cameras with an IMX219 sensor with a resolution of 8 MP. Interface expander included. Waveshare CM4-DUAL-CAMERA-BASE-Acce-A
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two cameras with an IMX219 sensor with a resolution of 8 MP. Waveshare CM4-DUAL-CAMERA-BASE
A set with IoT Router Carrier Board Mini and PiTray Mini base boards and a housing dedicated to Raspberry Pi CM4 modules. DFRobot DFR0767-2
4-channel PCIe port expander. It can be powered with 12 V via a PCIe connector or an external DC connector. Waveshare PCIe-Packet-Switch-4P
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a router. Seeed Studio 103110042
No product available!
Screen with a capacitive touch panel dedicated to the Raspberry Pi CM4. It can be used not only as an ordinary mirror, but also as a convenient computer for browsing the Internet or playing multimedia files. Waveshare 13.3inch Magic Mirror C4 (EU)
Base board dedicated to the Raspberry Pi CM4. It has the dimensions of a CM4 module and is equipped with basic connectors for interfaces. Waveshare CM4-NANO-A
No product available!
Base board dedicated to Raspberry Pi CM4 modules. Equipped with a 5 "IPS LCD display with a touch panel. Waveshare CM4-DISP-BASE-5A