zł282.69 tax excl.
A base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for basic interfaces including USB, USART, SPI and I2C. Seeed Studio 103100163
Base board designed for Raspberry Pi CM4 modules. It is equipped with special connectors for connecting the module and pinouts for the CM4 module's basic interfaces, including USB, CSI, USART, SPI and I2C. The Ochin Tiny Carrier Board is not equipped with a microSD card slot, so it can only work with modules with eMMC memory. Full documentation is available on the product page.

The expansion module has a compact design (the same size as the CM4 module), making it suitable for undersized robot projects. It has a built-in DC-DC converter with a capacity of 7 A and can be powered directly from a LiPo battery with a voltage of 7 to 28 V. The USB power circuit is further protected by a current switch on the USB VBUS line, which causes the voltage on the USB to be cut off if the current drawn reaches a threshold of 3 A.
The board is compatible with all Raspberry Pi CM4 modules equipped with eMMC. It has also been tested to work with the OpenHD software, which allows HD video streaming from a mobile station (rover, drone, aircraft, etc.) to a ground station. It is designed for a wide range of applications such as robotics, home automation and IoT projects.
Manufacturer
Responsible person
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM, 8 GB eMMC and wireless connectivity. Raspberry Pi CM4101008
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM, 16 GB eMMC and wireless connectivity. Raspberry Pi CM4101016
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM, 32 GB eMMC and wireless connectivity. Raspberry Pi CM4101032
Heatsink designed for mounting on Raspberry Pi CM4 modules. Komaptybilny with base boards Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-HEATSINK
CM5-PoE-BASE-A is a functional base board for the Raspberry Pi Compute Module 5, equipped with PoE power supply and a rich set of peripheral interfaces. With support for NVMe drives, MIPI cameras and displays, and two HDMI ports, it is well-suited for industrial projects, AI systems, and multimedia solutions. Ideal for prototyping and integration into finished products.
No product available!
CM5-NANO-B is a base board for Raspberry Pi Compute Module 5, offering full functionality in a compact form. With support for high-speed interfaces such as USB 3.2, HDMI 4K, PCIe, and MIPI, it serves as an ideal platform for prototyping and deploying embedded systems. The ability to integrate with DSI/CSI, use external cooling, and connect to a Gigabit Ethernet network makes the board well-suited for industrial, IoT, and consumer applications. Variant suitable for CM5 Lite and eMMC versions – the Compute Module 5 itself must be purchased separately.
CM5-IO-BASE-B is an advanced IO board for the Raspberry Pi Compute Module 5, offering a rich set of communication interfaces and encryption support. With its compact design and expansion options, it is ideal for industrial applications, multimedia projects, and as a base for building miniature computers.
No product available!
PoE HAT (H) is a high-efficiency power supply add-on for Raspberry Pi 5 and Compute Module 5, enabling data transmission and power delivery over a single Ethernet cable in accordance with the IEEE 802.3af/at standard. Thanks to the use of an isolated switching converter and compatibility with the official enclosure, it is suitable for stable and compact integration in network, automation, and remote device management projects.
CM5-DUAL-ETH-MINI is a compact base board with a dual Gigabit Ethernet interface, designed for the Compute Module 5. It enables the development of routers, network gateways, and industrial systems with high network throughput and a flexible GPIO interface. Thanks to its rich set of connectors and small dimensions, it is suitable for both prototyping and integration into final products.
CMX-ADAPTER is a protection board dedicated to Raspberry Pi CM4 and CM5 modules, designed for intensive use and repeated connection with base expansion boards. It facilitates integration and protects connectors from mechanical damage.
No product available!
A base board designed for Raspberry Pi Compute Module 5, featuring two Ethernet ports (1 Gb/s and 2.5 Gb/s), support for dual 4K HDMI outputs, dual MIPI interfaces, and an M.2 NVMe connector. The design with a 40-pin GPIO header, wide power input range, and a rich set of interfaces makes it suitable for networking, industrial applications, and high-performance systems. Waveshare CM5-DUAL-ETH-BASE
CM5-to-Pi5 adapter enables building a system based on the Compute Module 5 with functionality similar to the Raspberry Pi 5, while offering additional audio capabilities and flexibility of mounting and expansion, especially in embedded and industrial applications.
SuperCAP UPS LTC3350 is a backup power module for reComputer R1000 computers, based on the LTC3350 controller and four 7F/2.7 V supercapacitors. It provides stable power hold-up, supports safe system shutdown, and protects applications against the effects of sudden power outages.
reTerminal DM Dual DB9 is an expansion module for the reTerminal DM panel, adding two RS232/422/485 DB9 connectors. It enables reliable communication with industrial devices and control systems, enhancing the panel’s functionality in automation and integration applications.
No product available!
reTerminal DM Dual LAN and SSD is an expansion module adding two Gigabit Ethernet ports and an NVMe SSD slot to the reTerminal DM panel. It enables system expansion with increased network bandwidth, redundant connections, and local data storage for industrial and IoT applications.
No product available!
No product available!
Base board with dual Ethernet interfaces for Raspberry Pi Compute Module 5, designed for integration with 4G and 5G cellular modems and for networking and industrial applications. Waveshare CM5-DUAL-ETH-4G/5G-BASE
Compact Raspberry Pi Compute Module 5 carrier board featuring Gigabit Ethernet, USB 3.2 Gen1, Mini HDMI with 4K output, and two 4-lane MIPI CSI/DSI interfaces. Additional connectivity includes PCIe Gen2/3 x1, a microSD slot for CM5 Lite, a 3.5mm audio jack, and a 40-pin GPIO header. Supports 5V/5A power input through USB-C and eMMC flashing. The board measures 55 × 41mm and is supplied with a factory-soldered GPIO header, without Raspberry Pi Compute Module 5. Waveshare CM5-NANO-B-M
Industrial carrier board for Raspberry Pi Compute Module 5 with Gigabit Ethernet, support for optional 4G/5G/LoRa modules, M.2 B Key and M.2 M Key slots, 4K HDMI, dual MIPI, USB 3.2 Gen1, dual isolated RS485 and isolated CAN. Waveshare CM5-IO-WIRELESS-BASE
No product available!
100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 1.14 mm
A base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for basic interfaces including USB, USART, SPI and I2C. Seeed Studio 103100163