 
        
           
        
           
         
           
           
          Base board designed for Raspberry Pi CM4 modules. It is equipped with special connectors for connecting the module and outputting basic interfaces, including USB, DSI, mini HDMI and a 40-Pin GPIO connector compatible with HAT modules. The board is additionally equipped with a microSD card slot and an 8 MP camera with an IMX219 sensor. The module is powered via a USB type C connector. Full documentation is available on the product Wiki page.

| 1. CM4 socket | 7. GPIO header | 
| 2. Mini HDMI | 8. IMX219-D160 | 
| 3. DSI | 9. User button | 
| 4. USB 2.0 | 10. BOOT switch | 
| 5. micro SD | 11. ACK indicator | 
| 6. USB typu C | 12. PWR indicator | 
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 8 GB eMMC. Raspberry Pi CM4001008
 No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4001016
 No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 32 GB eMMC. Raspberry Pi CM4001032
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Dual ETH Quad RS485 Base Board. Waveshare CM4-ETH-RS485-BOX-B-EU
 No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Compute Module 4 PoE Board. Waveshare CM4-IO-POE-BOX-A
 No product available!
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
 No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal case with a fan, a power supply and a Dual Gigabit Ethernet Base Board. Waveshare CM4-DUAL-ETH-BOX-A-EU
 No product available!
reTerminal DM Dual LAN and SSD is an expansion module adding two Gigabit Ethernet ports and an NVMe SSD slot to the reTerminal DM panel. It enables system expansion with increased network bandwidth, redundant connections, and local data storage for industrial and IoT applications.
 No product available!
ED-CM4SEN-1208-C is a single board computer with a Raspberry Pi CM4 and a quad-core ARM Cortex-A72 1.5 GHz processor, equipped with eMMC, mPCIe, PCIe, Gigabit Ethernet, and five RS-232 ports. The design with a heatsink and an operating range of -25°C to 60°C allows it to be used in demanding industrial and network projects.
Industrial IoT backplane for Raspberry Pi CM. It uses the SIM7600G-H chip for 4G, 3G, 2G communication, and has a 10/100M Ethernet port with PoE function and a 2.4 GHz WiFi module. Enclosed in an aluminum housing. Waveshare CM-IO-POE-4G-BOX
 No product available!
Base board prepared for Raspberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare Compute Module 4 PoE Board (B)
Kit with base board for Raspberry Pi CM4. It allows you to connect modules with 4G, 5G or LoRa communication via the M.2 B Key or Mini-PCIe connector. Waveshare CM4-IO-WIRELESS-BASE
 No product available!
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
 No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal case with a fan, a power supply and a Mini Base Board (B) and a USB HDMI to FCC adapter. Waveshare CM4-IO-BASE-Acce D
reComputer R1035-10 is an industrial IoT computer based on Raspberry Pi CM4 with 8 GB RAM and 32 GB eMMC, equipped with isolated RS485 interfaces, two Ethernet ports with PoE support, and an M.2 NVMe slot. With AI support and wireless communication, it is suitable for automation systems, fleet management, and edge AI applications.
 No product available!
CMX-ADAPTER is a protection board dedicated to Raspberry Pi CM4 and CM5 modules, designed for intensive use and repeated connection with base expansion boards. It facilitates integration and protects connectors from mechanical damage.
 No product available!
CM5-NANO-B is a base board for Raspberry Pi Compute Module 5, offering full functionality in a compact form. With support for high-speed interfaces such as USB 3.2, HDMI 4K, PCIe, and MIPI, it serves as an ideal platform for prototyping and deploying embedded systems. The ability to integrate with DSI/CSI, use external cooling, and connect to a Gigabit Ethernet network makes the board well-suited for industrial, IoT, and consumer applications. Variant suitable for CM5 Lite and eMMC versions – the Compute Module 5 itself must be purchased separately.
 No product available!
A base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, in addition there is an RTC chip on the board Grove ports dedicated to the connection of external expansion modules. Cytron CM4 Maker Board
CM4-IO-BASE-B base board dedicated to Raspberry Pi CM4 modules in a set with a USB HDMI adapter to FCC. Waveshare CM4-IO-BASE-Acce B
 
                    Base board dedicated to Raspberry Pi CM4. It has the dimensions of a CM4 module and is equipped with an 8 MP camera and basic connectors for interfaces. Waveshare CM4-NANO-C