Feather HUZZAH w/ ESP8266 - Development board with ESP8266 WiFi module
ID: 1202029
zł100.61
Tax included
zł81.80 tax excl.
This compact ESP8266-based development board is ideal for IoT projects requiring 802.11 b/g/n Wi-Fi connectivity. It features a built-in CP2104 USB-to-UART converter with auto-reset, 4MB of Flash memory, and 9 GPIO pins with I2C and SPI support. The board also includes a LiPo battery header, a 100mA charger, and pre-soldered connectors for quick prototyping. Adafruit 3213
Description
Feather HUZZAH is a complete, ready-to-use development board from the Feather family, created by Adafruit as a lightweight, portable, and highly functional platform for IoT projects. At its core is the ESP8266 microcontroller clocked at 80 MHz, operating at 3.3V logic and equipped with a built-in 802.11 b/g/n WiFi stack. Thanks to compatibility with the Arduino IDE and NodeMCU Lua firmware, the board serves as a versatile solution for internet-connected and network applications. It includes a CP2104 USB–UART converter that enables fast code uploads at speeds up to 921600 baud and supports auto-reset for a seamless programming experience.
The board is also designed with mobile use in mind — it features a 3.7 V LiPo battery connector and a 100 mA LiPoly charger with a charging-status LED. When USB is connected, power automatically switches to the microUSB port. This version comes with factory-soldered headers, allowing convenient connection of additional FeatherWing modules without any extra soldering. It is an excellent platform for IoT, automation, control systems, and remote monitoring applications.
Features
- Built-in ESP8266 WiFi module clocked at 80 MHz
- 3.3V logic and power
- 4 MB FLASH memory
- WiFi 802.11 b/g/n support
- Integrated CP2104 USB–Serial converter, up to 921600 baud
- Automatic bootloader mode (auto-reset)
- 9 GPIO pins, I2C and SPI support
- 1 analog input (up to 1.0 V)
- Integrated 100 mA LiPoly charger with charge-status LED
- Optional trace cut to disable the charger
- Two LEDs: red on GPIO0, blue on GPIO2 (debug bootload + GPIO)
- 3.3V regulator with up to 500 mA output current
- Built-in microUSB port for power and programming
- Automatic USB/LiPo power switching
- Reset button
- 4 mounting holes
- Compatible with Arduino IDE and NodeMCU Lua
- Pre-installed Lua interpreter
- Dimensions: 51 × 23 × 19 mm
- Weight: 9.4 g
1202029
Data sheet
- Microcontroller
- ESP8266
- Flash memory
- 4 MB
- Number of I/O
- 09
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 51mm
- Width
- 23 mm
- USB connector type
- microUSB type B
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł117.08
24h
Available quantity: 1
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. The board has soldered goldpin connectors. Adafruit 3591
zł152.38
Delivery date unknown
No product available!
Other products in the same category (16)
Adafruit Feather 328P is a module with a built-in ATmega 328P AVR microcontroller (8MHz, 32kB Flash, 2kB RAM). The board is compatible with Arduino IDE, has small dimensions and low weight, and the built-in USB connector allows programming and debugging. Adafruit 3458
zł73.70
24h
Available quantity: 2
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
zł90.95
24h
Available quantity: 3
Available
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
zł144.23
24h
Available quantity: 2
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179
zł195.77
24h
Available quantity: 2
Available
This compact IoT board features a dual-core 240 MHz processor, 2.4 GHz WiFi, and Bluetooth LE. The w.FL antenna connector allows for an external antenna, increasing range and stability. The board offers 8 MB of Flash, 512 KB of SRAM, native USB with HID and MIDI support, and a built-in LiPo charger with a MAX17048 battery monitor. It also includes a STEMMA QT connector, a programmable NeoPixel, and full compatibility with the Feather ecosystem. The Adafruit 5885
zł88.26
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much). Adafruit 2796
zł137.85
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
zł102.85
24h
Available quantity: 1
Available
Development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The module also has an RFM69HCW chip that allows wireless communication in the 433 MHz band. Adafruit 3177
zł147.12
4 weeks
No product available!
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
zł183.63
24h
Available quantity: 1
Available
Adafruit Feather 32u4 RFM95 is a development board with built-in ATmega32u4 AVR microcontroller (8MHz, 32kB Flash, 2kB RAM) and RFM95W module enabling wireless communication in the 868 MHz or 915 MHz band. The board is compatible with Arduino IDE. Adafruit 3078
zł183.27
4 weeks
No product available!
The board is equipped with the ATSAMD51J19 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins, connector for connecting the battery with the charging circuit. Adafruit 3857
zł119.31
24h
Available quantity: 1
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5323
zł95.28
24h
Available quantity: 2
Available
Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
zł155.03
24h
Available quantity: 4
Available
At the Feather 32u4\'s heart is ATmega32u4 clocked at 8 MHz and at 3.3V logic. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc. Adafruit 2795
zł143.57
24h
Available quantity: 1
Available
Low-power, 2.4GHz spectrum wireless protocol that you can use with iOS without needing special certification. Supported by all modern smart phones - excellent for use in portable projects that will make use of an iOS or Android phone or tablet; it also is supported in Mac OS X and Windows 8+. Adafruit 2995
zł155.48
4 weeks
No product available!
This compact ESP8266-based development board is ideal for IoT projects requiring 802.11 b/g/n Wi-Fi connectivity. It features a built-in CP2104 USB-to-UART converter with auto-reset, 4MB of Flash memory, and 9 GPIO pins with I2C and SPI support. The board also includes a LiPo battery header, a 100mA charger, and pre-soldered connectors for quick prototyping. Adafruit 3213