Feather RP2350 - Development board with RP2350 microcontroller and 8MB PSRAM
ID: 1196814
5902186301726
zł78.54
Tax included
zł63.85 tax excl.
A modern development board in the Feather format, equipped with a dual-core Raspberry Pi RP2350 Cortex M33 microcontroller clocked at 150 MHz and 8 MB of PSRAM, ideal for advanced IoT projects and Micropython/CircuitPython applications. The board offers a wide range of ports, including an HSTX 22-pin connector, USB-C with bootloader, and STEMMA QT, as well as numerous GPIOs and an integrated LiPo battery charger, combining high performance with convenience of use. Adafruit 6130
Description
Feather RP2350 HSTX is a modern Feather-format development board equipped with the new Raspberry Pi RP2350 microcontroller featuring a dual-core Cortex M33 processor clocked at 150 MHz. Thanks to its 8 MB PSRAM, it is ideal for projects requiring large memory buffers, such as advanced IoT applications or Micropython/CircuitPython. The board offers numerous features and ports, including a 22-pin HSTX connector for high-speed data transfer, a USB-C port with a built-in ROM bootloader, and a STEMMA QT connector for easy sensor and accessory connection. The RP2350 is a significant advancement over the popular RP2040 — providing twice the SRAM, hardware floating-point support, and a modern ARM Cortex-M33 core, resulting in substantially higher performance. Additionally, it offers 29 GPIOs: 21 on standard Feather pins and 8 on the HSTX connector, making this board very versatile. Integrated LiPo battery charging, charging status indicator, as well as reset and BOOTSEL buttons facilitate operation. Feather RP2350 HSTX is an excellent choice for advanced projects requiring power, flexibility, and convenience in a compact format.
Features
- Microcontroller: RP2350 Cortex M33 dual core, 150 MHz
- RAM: 520 KB SRAM + 8 MB QSPI PSRAM
- Flash Memory: 8 MB QSPI (external)
- Connectors: USB-C, 22-pin HSTX, STEMMA QT, 3-pin JST SH for SWD debugging
- Interfaces: 2x I2C, 2x SPI, 2x UART, 21 GPIO
- 24 PWM channels
- 4x 12-bit ADCs
- Integrated LiPo battery charger (200 mA+) with status indicator
- Buttons: Reset and BOOTSEL (bootloader)
- Built-in red LED (pin 7) and RGB NeoPixel
- 12 MHz crystal oscillator
- 3.3V regulator with max current of 500 mA
- Support for MicroPython, CircuitPython, C/C++, Arduino
- Dimensions: 52.2 x 22.8 x 7.2 mm
- Weight: 5.6 g
Kit contains
- Feather RP2350 development board
- 2 x goldpin headers
1196814
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 8 MB
- Number of I/O
- 21
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 50,8 mm
- Width
- 22,8 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
FeatherWing Proto - Prototyping Add-on For All Feather Boards
zł27.02
24h
Available quantity: 2
Available
FeatherWing Doubler is a shield that allows you to create your own layout based on two or one Feather series. The plate has 256 holes, including designated, common solder points for supply voltages. Adafruit 2890
zł42.83
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much). Adafruit 2796
zł137.85
24h
Available quantity: 1
Available
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight. Adafruit 2900
zł83.32
24h
Available quantity: 1
Available
Other products in the same category (16)
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
zł157.76
24h
Available quantity: 1
Available
Adafruit Feather 328P is a module with a built-in ATmega 328P AVR microcontroller (8MHz, 32kB Flash, 2kB RAM). The board is compatible with Arduino IDE, has small dimensions and low weight, and the built-in USB connector allows programming and debugging. Adafruit 3458
zł73.70
24h
Available quantity: 2
Available
The board is equipped with the ATSAMD51J19 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins, connector for connecting the battery with the charging circuit. Adafruit 3857
zł119.31
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884
zł79.03
24h
Available quantity: 3
Available
The board is equipped with a STM32F405 microcontroller with an ARM Cortex-M4 core and SPI Flash memory, GPIO pins, a connector for connecting a battery with a charging circuit and a STEMMA QT socket. Adafruit 4382
zł217.59
24h
Available quantity: 1
Available
The board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
zł143.34
4 weeks
No product available!
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and BLE communication. Equipped with motion sensors, magnetometer, light, humidity, pressure sensors and a microphone. Adafruit 4516
zł245.41
4 weeks
No product available!
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
zł144.23
24h
Available quantity: 2
Available
Module with WiFi Espressif ESP32-S2. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5000
zł87.88
4 weeks
No product available!
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5323
zł92.79
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
zł99.68
24h
Available quantity: 2
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
zł90.76
4 weeks
No product available!
Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
zł155.03
24h
Available quantity: 4
Available
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
zł121.44
24h
Available quantity: 3
Available
A board with an RP2040 microcontroller and a LoRa RF95 module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and STEMMA QT connector. Ideal for IoT projects. Adafruit 5714
zł175.46
24h
Available quantity: 1
Available
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
zł85.77
24h
Available quantity: 4
Available
A modern development board in the Feather format, equipped with a dual-core Raspberry Pi RP2350 Cortex M33 microcontroller clocked at 150 MHz and 8 MB of PSRAM, ideal for advanced IoT projects and Micropython/CircuitPython applications. The board offers a wide range of ports, including an HSTX 22-pin connector, USB-C with bootloader, and STEMMA QT, as well as numerous GPIOs and an integrated LiPo battery charger, combining high performance with convenience of use. Adafruit 6130