FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards
ID: 560921
5906623470099
zł83.32
Tax included
zł67.74 tax excl.
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight. Adafruit 2900
Description
A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!
These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! We also toss on a reset button and three mini tactile buttons called A B and C so you can add a mini user interface to your feather.
Tested working with all Feather boards. The OLED uses only the two I2C pins on the Feather, and you can pretty much stack it with any other FeatherWing, even ones that use I2C since that is a shared bus
Features
- PCB dimensions: 22.9mm x 50.9mm / 0.9" x 2"
- Display area: ~25.8mm / ~1.0"
- Weight: 4.8g
560921
Data sheet
- Screen type
- OLED graphic
- Diagonal (inch)
- 0,91
- Resolution
- 128 x 32 px
- Interface
- I2C
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
FeatherWing Proto - Prototyping Add-on For All Feather Boards
zł27.02
24h
Available quantity: 2
Available
FeatherWing Doubler is a shield that allows you to create your own layout based on two or one Feather series. The plate has 256 holes, including designated, common solder points for supply voltages. Adafruit 2890
zł42.83
24h
Available quantity: 1
Available
This module enables the Feather series range to be expanded with 8 12-bit PWM outputs that can be used, for example, to control servos or LED diodes. Adafruit 2928
zł55.40
24h
Available quantity: 1
Available
DS3231 Precision RTC FeatherWing adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO) to any Feather main board. Adafruit 3028
zł89.30
24h
Available quantity: 1
Available
7-segment display controller, allowing communication over the I2C bus. Allows you to limit the pins needed to control the display. Adafruit 3088
zł52.00
24h
Available quantity: 1
Available
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. RED matrix. Adafruit 3134
zł55.95
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with a black and white OLED display with a diagonal of 2.23" and a resolution of 128x32 pixels. Designed for minicomputers Raspberry Pi. Adafruit 4567
zł112.08
24h
Available quantity: 1
Available
1.5inch OLED display Module is an OLED display with I2C / SPI interface with 128x128 resolution, powered by 3.3-5V. Waveshare 1.5inch OLED Module
zł68.45
24h
Available quantity: 2
Available
Module with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
zł12.87
24h
Available quantity: 10
Available
1.3 "OLED display, 128x64 resolution, SPI, SH1106, RoHS
zł70.84
24h
Available quantity: 19
Available
Module with a 1.51" OLED transparent display. Communicates via the SPI or GDI interface. DFRobot DFR0934
zł231.73
24h
Available quantity: 1
Available
OLD 0.96 "display with 128x64 resolution based on SSD1306 driver. Communication via I2C interface.
zł15.90
24h
Available quantity: 5
Available
Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in white. It communicates via the SPI interface. ModOLEDdisp0.66"SPIwhite
zł17.79
24h
Available quantity: 6
Available
OLED display with a diagonal of 1.3" and a resolution of 128x64 pixels. Designed for use with Feather series plates. Adafruit 4650
zł84.24
24h
Available quantity: 1
Available
A 0.91-inch OLED display that offers a resolution of 128x32 pixels and the ability to display up to four lines of text. It communicates via an I2C interface and uses popular Qwiic connectors. SparkFun LCD-24606
zł57.72
3 weeks
No product available!
2.42-inch OLED display with a resolution of 128x64 pixels with an SSD1309 controller and an SPI interface. It provides high contrast, wide viewing angles, and reliable operation in temperatures from -30°C to 85°C. It operates at a voltage of 2.4 to 3.6 V, and the yellow display color ensures good readability even in low light. modOLED2.42-Y
zł52.35
24h
Available quantity: 2
Available
100x16 Graphic OLED Display, 80x36mm, Negative Black Surface, Green Dot, 5V, RoHS
zł77.31
24h
Available quantity: 3
Available
0.96inch OLED, SPI/I2C interfaces, curved/horizontal pinheader
zł35.99
24h
Available quantity: 1
Available
Monochrome OLED display with a diagonal of 1.3" and a resolution of 128x64 pixels. It has a built-in SH1106 controller, communication via the SPI interface. Pololu 3760
zł63.43
24h
Available quantity: 2
Available
OLD 0.96 "display, 128x64 pixel resolution, I2C, SSD1306, RoHS
zł14.07
24h
Available quantity: 27
Available
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250
zł67.99
24h
Available quantity: 1
Available
Module with 1.3 "OLED display with a resolution of 128x64 pixels based on the SH1106 driver. Communication via the I2C interface.
zł21.71
4 weeks
No product available!
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight. Adafruit 2900