| Driver Chip | SSD1331 |
|---|---|
| Interface | SPI |
| Resolution | 96×64 |
| Display Size | 0.95inch |
| Colors | 65K colorful |
| Visible Angle | >160° |
| Operating Temp. (?) | -20~70 |
| Storage Temp. (?) | -30~80 |
| Operating Voltage | 3.3V / 5V |
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
The 0.95inch RGB OLED provides 2 options for the onboard pinheader:

| Part Number | Color | Resolution | Display Size (mm×mm) | Interfaces | Driver | Dimension (mm×mm) | Pinheader |
|---|---|---|---|---|---|---|---|
| 0.95inch RGB OLED (A) | 65K colorful | 96×64 | 20.14×13.42 | SPI(4-wire SPI) | SSD1331 | 31.7×37.0 | curved/horizontal |
| 0.95inch RGB OLED (B) | 65K colorful | 96×64 | 20.14×13.42 | SPI(4-wire SPI) | SSD1331 | 31.7×37.0 | straight/vertical |
| 0.96inch OLED (A) | 1/4 yellow section, 3/4 blue section | 128×64 | 21.7×11.2 | 3-wire SPI, 4-wire SPI, I2C | SSD1306 | 33.0×33.5 | curved/horizontal |
| 0.96inch OLED (B) | 1/4 yellow section, 3/4 blue section | 128×64 | 21.7×11.2 | 3-wire SPI, 4-wire SPI, I2C | SSD1306 | 33.0×33.5 | straight/vertical |
| 1.3inch OLED (A) | Blue | 128×64 | 29.42×14.7 | 3-wire SPI, 4-wire SPI, I2C | SH1106 | 40.5×37.5 | curved/horizontal |
| 1.3inch OLED (B) | Blue | 128×64 | 29.42×14.7 | 3-wire SPI, 4-wire SPI, I2C | SH1106 | 40.5×37.5 | straight/vertical |
Weight: 0.006 kg
1. 0.95inch RGB OLED (A) x 1
Data sheet
Manufacturer
Responsible person
No product available!
Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in blue. It communicates via the SPI interface. ModOLEDdisp0.66"SPIblue
Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in white. It communicates via the SPI interface. ModOLEDdisp0.66"SPIwhite
Module with OLED display, 1.3" diagonal and 64x128 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-1.3
No product available!
OLED display with a diagonal of 1.3" and a resolution of 128x64 pixels. Designed for use with Feather series plates. Adafruit 4650
The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the I2C interface. Pimoroni PIM374
The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the SPI interface. Pimoroni PIM473
Module with OLED display, 2.23" diagonal and 128x32 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-2.23
Module with a 1.5" black and white OLED display with a resolution of 128x128. Offers 16 gray levels and communicates via the I2C or SPI interface. Adafruit 4741
The module with a black and white OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. Equipped with a STEMMA QT connector, communicates via the I2C interface. Adafruit 4440
Module with a black and white OLED display with a diagonal of 2.23" and a resolution of 128x32 pixels. Designed for minicomputers Raspberry Pi. Adafruit 4567
Module with a black and white OLED display with a diagonal of 1.3" and a resolution of 128x64 px. Designed for minicomputers Raspberry Pi. Adafruit 3531
Module with a black and white OLED display 1.3" with a resolution of 128x64 pixels. Designed for M5Stack sets. It communicates via the I2C interface. M5Stack U119
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250
No product available!
Module with a 1.51" OLED transparent display. Communicates via the SPI or GDI interface. DFRobot DFR0934
Module with a color OLED 1.5" display with a resolution of 128x128. Communicates via the SPI interface. Waveshare 1.5inch RGB OLED Module
Black and white OLED display with a resolution of 128x32 pixels. Powered with the voltage from 3.3 V to 5V, it communicates via the I2C interface. Waveshare 0.91inch OLED Module
No product available!
0.95inch RGB OLED, SPI interface, curved/horizontal pinheader