| Driver Chip | SSD1331 |
|---|---|
| Interface | SPI |
| Resolution | 96×64 |
| Display Size | 0.95inch |
| Colors | 65K colorful |
| Visible Angle | >160° |
| Operating Temp. (?) | -20~70 |
| Storage Temp. (?) | -30~80 |
| Operating Voltage | 3.3V / 5V |
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
The 0.95inch RGB OLED provides 2 options for the onboard pinheader:
Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/0.95inch_RGB_OLED_(B)

| Part Number | Color | Resolution | Display Size (mm×mm) | Interfaces | Driver | Dimension (mm×mm) | Pinheader |
|---|---|---|---|---|---|---|---|
| 0.95inch RGB OLED (A) | 65K colorful | 96×64 | 20.14×13.42 | SPI(4-wire SPI) | SSD1331 | 31.7×37.0 | curved/horizontal |
| 0.95inch RGB OLED (B) | 65K colorful | 96×64 | 20.14×13.42 | SPI(4-wire SPI) | SSD1331 | 31.7×37.0 | straight/vertical |
| 0.96inch OLED (A) | 1/4 yellow section, 3/4 blue section | 128×64 | 21.7×11.2 | 3-wire SPI, 4-wire SPI, I2C | SSD1306 | 33.0×33.5 | curved/horizontal |
| 0.96inch OLED (B) | 1/4 yellow section, 3/4 blue section | 128×64 | 21.7×11.2 | 3-wire SPI, 4-wire SPI, I2C | SSD1306 | 33.0×33.5 | straight/vertical |
| 1.3inch OLED (A) | Blue | 128×64 | 29.42×14.7 | 3-wire SPI, 4-wire SPI, I2C | SH1106 | 40.5×37.5 | curved/horizontal |
| 1.3inch OLED (B) | Blue | 128×64 | 29.42×14.7 | 3-wire SPI, 4-wire SPI, I2C | SH1106 | 40.5×37.5 | straight/vertical |
Weight: 0.006 kg
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Graphical display, users may show off graphs, full-color pictures, text, and anything else they want to see by communicating with it through SPI. Digilent 410-323
0.95inch RGB OLED, SPI interface, curved/horizontal pinheader
Module with a black and white OLED display with a resolution of 128x64 px, designed for FireBeetle plates. It communicates via the I2C interface. DFRobot DFR0507
Module with a black and white, flexible OLED display with a diagonal of 1.81" and a resolution of 160x32 pixels. Communication via the SPI interface. SparkFun LCD-14606
Module with a black and white OLED display with a diagonal of 1.3" and a resolution of 128x64 px. Designed for minicomputers Raspberry Pi. Adafruit 3531
Module with black and white OLED display, 0.96" diagonal and 128x64 px resolution. Equipped with STEMMA QT connector, communicates via I2C or SPI interface. Adafruit 326
The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the SPI interface. Pimoroni PIM473
OLD 1.3 "monochrome display with 128x64 pixel resolution with SH1106 driver The text is displayed in white, thanks to OLED technology, the power consumption is only 0.08 W. Communication via the SPI interface
No product available!
Module with a black and white OLED display with a diagonal of 2.23" and a resolution of 128x32 pixels. Designed for minicomputers Raspberry Pi. Adafruit 4567
Monochrome OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. The display has a built-in SSD1306 controller, communication via the I2C interface. DFRobot DFR0647
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020452
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight. Adafruit 2900
The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the I2C interface. Pimoroni PIM374
100x8 Graphic OLED Display, 80x36mm, Negative Black Surface, Yellow Dot, 5V, RoHS
A 0.91-inch OLED display that offers a resolution of 128x32 pixels and the ability to display up to four lines of text. It communicates via an I2C interface and uses popular Qwiic connectors. SparkFun LCD-24606
No product available!
Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in blue. It communicates via the I2C interface. ModOLEDdisp0.66"I2Cblue
Module with 1.27" OLED colour display with 128x96 resolution. It communicates via an SPI interface. Waveshare 1.27inch RGB OLED Module