New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
0.96" OLED Display (B) - Waveshare 9092
ID: 559799
5906623421480
zł28.99
Tax included
zł23.57 tax excl.
0.96inch OLED, SPI/I2C interfaces, straight/vertical pinheader
Key Parameters
| Driver Chip | SSD1306 |
|---|---|
| Interface | 3-wire SPI, 4-wire SPI, I2C |
| Resolution | 128*64 |
| Display Size | 0.96inch |
| Colors | Yellow, Blue |
| Visible Angle | >160° |
| Dimension | 33mm*33.50mm |
| Operating Temp. (?) | -20~70 |
| Storage Temp. (?) | -30~80 |
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
Hardware Config
| Mode/Interface | BS0/BS1 | DIN | SCK |
|---|---|---|---|
| 3-wire SPI | 1/0 | MOSI | SCLK |
| 4-wire SPI | 0/0 | ||
| I2C | 0/1 | SDA | SCL |
Ordering Info
The 0.96inch OLED provides 2 options for the onboard pinheader:
- 0.96inch OLED (A): curved/horizontal pinheader
- 0.96inch OLED (B): straight/vertical pinheader
Downloads
Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/0.96inch_OLED_(B)
Dimension
-
Weight: 0.005 kg
- 0.96inch OLED (B) x 1
559799
Data sheet
- Screen type
- OLED graphic
- Diagonal (inch)
- 0,96
- Resolution
- 128 x 64 px
- Interface
- SPI/I2C
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
0.96inch OLED, SPI/I2C interfaces, curved/horizontal pinheader
zł35.99
24h
Available quantity: 1
Available
1.3inch OLED display HAT for Raspberry Pi, 128x64 pixels, SPI/I2C interface
zł41.55
24h
Available quantity: 1
Available
Other products in the same category (16)
A 1.54-inch blue OLED display that allows you to display basic graphics and text. It has a resolution of 128 x 64 pixels and communicates via the SPI or I2C interface. Waveshare 1.54inch OLED Module (B)
zł51.84
24h
Available quantity: 3
Available
OLED display 128x64 1.54 "AA, 3V SPD0301 I2C SPI Parallel White, working temperature from -40 to +70 ext. 12V
zł49.86
24h
Available quantity: 2
Available
Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in blue. It communicates via the SPI interface. ModOLEDdisp0.66"SPIblue
zł27.05
24h
Available quantity: 5
Available
Module with a 1.51" OLED transparent display. Communicates via the SPI or GDI interface. DFRobot DFR0934
zł231.73
24h
Available quantity: 1
Available
The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the SPI interface. Pimoroni PIM473
zł97.85
24h
Available quantity: 1
Available
OLED display with a diagonal of 2.4" and a resolution of 128x64 pixels. Displays the content in yellow. Uses the SSD1309 driver and communicates via the SPI or I2C bus. Waveshare 2.42inch OLED Module (C)
zł67.12
24h
Available quantity: 4
Available
Module with a black and white OLED display 1.3" with a resolution of 128x64 pixels. Designed for M5Stack sets. It communicates via the I2C interface. M5Stack U119
zł63.09
24h
Available quantity: 1
Available
OLD 0.96 "display with 128x64 resolution based on SSD1306 driver. Communication via I2C interface.
zł15.90
24h
Available quantity: 5
Available
Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in white. It communicates via the I2C interface. ModOLEDdisp0.66"I2Cwhite
zł26.90
4 weeks
No product available!
A 0.66" monochrome OLED display module with 64x48 pixel resolution. It uses the SSD1306 controller and communicates via an I2C or SPI interface. It has a soldered connector. SparkFun LCD-13722
zł110.77
24h
Available quantity: 2
Available
Module with OLED 0.96" display with a resolution of 128x64 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104030008
zł94.59
24h
Available quantity: 3
Available
A small monochrome OLED display with a diagonal of 1.3 inches and a resolution of 128x64 pixels. Displays text in white on a black background. It is equipped with an I2C interface and uses the popular Qwiic connector. SparkFun LCD-23453
zł95.28
3 weeks
No product available!
OLED display with a diagonal of 0.49" and a resolution of 64x32 pixels. Displays content in white. Uses the SSD1315 controller and communicates via the I2C bus. Waveshare 0.49inch OLED Module
zł20.38
24h
Available quantity: 6
Available
Module with OLED display, 2.23" diagonal and 128x32 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-2.23
zł59.93
4 weeks
No product available!
2.42-inch OLED display with a resolution of 128x64 pixels with an SSD1309 controller and an SPI interface. It provides high contrast, wide viewing angles, and reliable operation in temperatures from -30°C to 85°C. It operates at a voltage of 2.4 to 3.6 V, and the white display color ensures good readability even in low light. modOLED2.42-W
zł52.35
4 weeks
No product available!
Module with 1.27" OLED colour display with 128x96 resolution. It communicates via an SPI interface. Waveshare 1.27inch RGB OLED Module
zł76.53
24h
Available quantity: 4
Available
0.96inch OLED, SPI/I2C interfaces, straight/vertical pinheader