zł50.59 tax excl.
A small monochrome OLED display with a diagonal of 0.66 inches and a resolution of 64x48 pixels. Displays text in blue on a black background. It is equipped with an I2C interface and uses the popular SSD1306 driver. SparkFun LCD-22495
A small monochrome OLED display with a diagonal of 0.66 inches and a resolution of 64x48 pixels. Displays text in blue on a black background. It is equipped with an I2C interface and uses the popular SSD1306 driver, which facilitates integration with other devices. The module is perfect for adding graphics to a project and displaying diagnostic information, without the need to use the UART serial port.
The board is equipped with two Qwiic connectors, which makes it ideal for using the I2C bus. You can freely adjust the I2C address according to your needs. Practical jumpers allow you to configure pull-up resistors and the I2C address. The manufacturer has also added two mounting holes and a convenient Qwiic cable holder, built into a detachable tab on the board, which can be easily removed thanks to the notched edge. The OLED display is a compact and versatile solution, perfect for a variety of projects.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
Evaluation kit with SiFive Freedom E310 RISC-V (ISA) microcontroller. It has 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 for USB and JTAG, and a Qwiic and USB Type-C connector. SparkFun DEV-15799
No product available!
Module with digital temperature sensor AS6212. It enables measurement in the range from –40°C to 125°C with an accuracy of 0.2°C. SparkFun SEN-18521
Module with digital barometer BMP384. It enables pressure measurement in the range from 300 to 1250 hPa with 24-bit resolution and communicates via I2C or SPI. SparkFun SEN-19662
No product available!
Module with a black and white OLED display with a diagonal of 2.23" and a resolution of 128x32 pixels. Designed for minicomputers Raspberry Pi. Adafruit 4567
A 0.91-inch OLED display that offers a resolution of 128x32 pixels and the ability to display up to four lines of text. It communicates via an I2C interface and uses popular Qwiic connectors. SparkFun LCD-24606
No product available!
The modOLED096_I2C SSD1306 display enables presenting graphics and text in high contrast using the I2C interface. Its compact size, low power consumption, and wide compatibility make it a versatile component in electronic projects and microprocessor systems.
No product available!
2.23" OLED display overlay designed for Raspberry Pi minicomputers. Module based on SSD1305 driver, communicates via SPI or I2C interface. Waveshare 2.23inch OLED HAT
The module with a black and white OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. Equipped with a STEMMA QT connector, communicates via the I2C interface. Adafruit 4440
76x16 Graphic OLED Display, 55.7x32mm, Negative Black Surface, Yellow Dot, 5V, RoHS
A 0.66" monochrome OLED display module with 64x48 pixel resolution. It uses the SSD1306 controller and communicates via an I2C or SPI interface. It has a soldered connector. SparkFun LCD-13722
A 0.96-inch blue OLED display that allows basic graphics and text to be displayed. It has a resolution of 128 x 64 pixels and communicates via an SPI or I2C interface. Waveshare 0.96inch OLED Module (E)
Module with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
Module with a black and white OLED display 1.3" with a resolution of 128x64 pixels. Designed for M5Stack sets. It communicates via the I2C interface. M5Stack U119
1.3 "OLED display, 128x64 resolution, SPI, SH1106, RoHS
Module with a black and white, flexible OLED display with a diagonal of 1.81" and a resolution of 160x32 pixels. Communication via the SPI interface. SparkFun LCD-14606
Module with 1.3 "OLED display with a resolution of 128 x 64 pixels, thanks to the SH1106 driver and communication via the I2C bus is an ideal solution to build a device with a spectacular appearance and reliable work
No product available!
OLED display 128x64 1.54 "AA, 3V SPD0301 I2C SPI Parallel White, working temperature from -40 to +70 ext. 12V
The PAC1934 is an advanced multi-channel DC power and energy monitor from Microchip that provides precise monitoring and data accumulation, ideal for power management systems and IoT applications.
A small monochrome OLED display with a diagonal of 0.66 inches and a resolution of 64x48 pixels. Displays text in blue on a black background. It is equipped with an I2C interface and uses the popular SSD1306 driver. SparkFun LCD-22495