0.96" OLED Display (A) - Waveshare 9085
ID: 560775
5906623421688
zł35.99
Tax included
zł29.26 tax excl.
0.96inch OLED, SPI/I2C interfaces, curved/horizontal pinheader
Key Parameters
| Driver Chip | SSD1306 |
|---|---|
| Interface | 3-wire SPI, 4-wire SPI, I2C |
| Resolution | 128*64 |
| Display Size | 0.96inch |
| Colors | Yellow, Blue |
| Visible Angle | >160° |
| Dimension | 33mm*33.50mm |
| Operating Temp. (?) | -20~70 |
| Storage Temp. (?) | -30~80 |
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
Hardware Config
| Mode/Interface | BS0/BS1 | DIN | SCK |
|---|---|---|---|
| 3-wire SPI | 1/0 | MOSI | SCLK |
| 4-wire SPI | 0/0 | ||
| I2C | 0/1 | SDA | SCL |
Ordering Info
The 0.96inch OLED provides 2 options for the onboard pinheader:
- 0.96inch OLED (A): curved/horizontal pinheader
- 0.96inch OLED (B): straight/vertical pinheader
Downloads
Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/0.96inch_OLED_(A)
Dimension
-
Weight: 0.005 kg
- 0.96inch OLED (A) x 1
560775
Data sheet
- Screen type
- OLED graphic
- Diagonal (inch)
- 0,96
- Resolution
- 128 x 64 px
- Interface
- SPI/I2C
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
0.96inch OLED, SPI/I2C interfaces, straight/vertical pinheader
zł28.99
24h
Available quantity: 7
Available
0.95inch RGB OLED, SPI interface, straight/vertical pinheader
zł57.64
24h
Available quantity: 2
Available
Other products in the same category (16)
Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. DEV-13628
zł126.27
24h
Available quantity: 2
Available
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020452
zł89.67
24h
Available quantity: 2
Available
The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the I2C interface. Pimoroni PIM374
zł97.45
24h
Available quantity: 1
Available
Graphical display, users may show off graphs, full-color pictures, text, and anything else they want to see by communicating with it through SPI. Digilent 410-323
zł181.94
24h
Available quantity: 2
Available
Module with 0.91 "OLED display with a resolution of 128 x 32 pixels, thanks to the SSD1306 driver and communication via the I2C bus, it is an ideal solution to build a device with a spectacular appearance and reliable work
zł13.57
24h
Available quantity: 7
Available
Module with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
zł12.87
24h
Available quantity: 8
Available
100x16 Graphic OLED Display, 80x36mm, Negative Black Surface, Green Dot, 5V, RoHS
zł77.31
24h
Available quantity: 3
Available
OLD 1.3 "monochrome display with 128x64 pixel resolution with SH1106 driver The text is displayed in white, thanks to OLED technology, the power consumption is only 0.08 W. Communication via the SPI interface
zł27.92
24h
Available quantity: 8
Available
OLED display 1.5 ", resolution 128x128 pixels, 3V SSD1327 SPI GRAY SCALE, work temp. From -40 to +70.
zł42.90
24h
Available quantity: 2
Available
Module with a black and white OLED display 1.3" with a resolution of 128x64 pixels. Designed for M5Stack sets. It communicates via the I2C interface. M5Stack U119
zł63.09
24h
Available quantity: 1
Available
2.23" OLED display overlay designed for Raspberry Pi minicomputers. Module based on SSD1305 driver, communicates via SPI or I2C interface. Waveshare 2.23inch OLED HAT
zł55.56
24h
Available quantity: 5
Available
2.42-inch OLED display with a resolution of 128x64 pixels with an SSD1309 controller and an SPI interface. It provides high contrast, wide viewing angles, and reliable operation in temperatures from -30°C to 85°C. It operates at a voltage of 2.4 to 3.6 V, and the white display color ensures good readability even in low light. modOLED2.42-W
zł52.35
4 weeks
No product available!
Module with 1.3 "OLED display with a resolution of 128 x 64 pixels, thanks to the SH1106 driver and communication via the I2C bus is an ideal solution to build a device with a spectacular appearance and reliable work
zł17.50
4 weeks
No product available!
The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the SPI interface. Pimoroni PIM473
zł97.85
24h
Available quantity: 1
Available
OLED display with a diagonal of 0.49" and a resolution of 64x32 pixels. Displays content in white. Uses the SSD1315 controller and communicates via the I2C bus. Waveshare 0.49inch OLED Module
zł20.38
4 weeks
No product available!
1.3 "OLED display, 128x64 resolution, SPI, SH1106, RoHS
zł70.84
24h
Available quantity: 19
Available
0.96inch OLED, SPI/I2C interfaces, curved/horizontal pinheader