Bionic Robot Hand - bionic hand (left)
ID: 566121
zł1,150.60
Tax included
zł935.45 tax excl.
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0142
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Bionic hand controlled by 5 servos. It is made of acrylic material, allows you to control each finger separately. Each finger has a spring damping structure that will effectively protect the robot's hand from mechanical stress. It can grasp an object weighing up to 500 g. The structure is placed on a stable base and can be controlled using, for example, a servo controller and an Arduino. Full documentation is available on the product page.
Features
- Supply voltage: 4.8 V to 6 V
- Control signal: from 1.0 ms to 2.0 ms (45 ° to 135 °)
- Maximum current: 2 A.
- Payload: 500 g
- Servo torque: 2.4 kg*cm (0.23 Nm) for 4.8 V, 2.8 kg*cm (0.27 Nm) for 6 V
- Speed: 0.11s/60° for 4.8V, 0.09s/60° for 6V
- Colors of servo leads:
- Brown: GND
- Red: VCC
- Orange: control signal
- Working temperature: 0 ° C to 55 ° C
- Dimensions: 330 mm
- Weight: 916 g
566121
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł109.90
24h
Available quantity: 302
Available
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł24.12
24h
Available quantity: 4
Available
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0143
zł1,150.60
Delivery date unknown
No product available!
Other products in the same category (9)
A 5 DoF robotic arm built with servos and ESP32. It can be controlled wirelessly via WiFi and web browser or USB interface. Waveshare RoArm-M1 (EU)
zł1,607.36
24h
Available quantity: 1
Available
A set for self-assembly of a robotic arm with four degrees of freedom (4DOF) equipped with MG90S servomechisms. The arm at the end has a small gripper which allows you to catch and carry small objects. The handle is controlled using a plate compatible with Arduino Uno or a module with potentiometers.
zł203.44
24h
Available quantity: 2
Available
A robotic arm with four degrees of freedom (4 DoF) based on servomechanisms and a controller with an ESP32 module. It can be controlled wirelessly via WiFi and a web browser or USB interface. Waveshare RoArm-M2-S (EU)
zł1,025.43
24h
Available quantity: 3
Available
Four degrees of freedom (4DOF) robotic arm assembly kit. The robotic arm was based on servos and is controlled wirelessly using a Raspberry Pi. Waveshare Robot Arm for Pi (for Europe)
zł220.87
4 weeks
No product available!
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0143
zł1,150.60
4 weeks
No product available!
Empower your Romi robot to manipulate its surroundings with this robotic arm accessory kit! The kit contains everything you need to build the arm, including a micro gripper and three servos—one for controlling the height of the arm, one for controlling the tilt of the gripper, and one for actuating the gripper paddles themselves.
zł483.64
6 weeks
No product available!
A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551
zł123.63
6 weeks
No product available!
A new version of the popular Kitronik Klaw gripper, perfect for robotic and buggy projects. Compatible with MOVE Mk1 and Mk2, it enables precise gripping of objects using a servo mechanism, ensuring easy assembly and wide range of applications in robotics. Kitronik 25104
zł46.85
24h
Available quantity: 5
Available
A robotic gripper based on the SG92R servo. It has an opening and closing angle of 90° and mounting holes compatible with Lego. M5Stack U102
zł41.91
24h
Available quantity: 1
Available
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0142