Trenz TE0710-02-100-2CF - set with Artix-7 FPGA
ID: 565105
zł1,141.23
Tax included
zł927.83 tax excl.
Module with Xilinx Artix 7 100T system, two 100 MBit Ethernet circuits, 512 MB RAM memory, 32 MB flash memory and built-in voltage converters. TE0710-02-100-2CF
Description
Module with Xilinx Artix 7 100T system, two 100 MBit Ethernet circuits, 512 MB RAM memory, 32 MB flash memory and built-in voltage converters. All this fits on a small plate measuring 4 x 5 cm. TE0710-02-100-2CF
properties
- Xilinx Artix-7 XC7A100T-2CSG324C FPGA chip
- High durability against shocks and vibrations
- Quad-SPI Flash memory with a capacity of 32 MB
- MEMS Oscyclator - 100 MHz
- 512 MB DDR3 memory
- Two 100Mbit Ethernet circuits with a MAC address in the EEPROM memory
- Built-in high performance DC / DC converters:
- Core voltage stabilizer (4A)
- 4.0 A x 1.0 V
- 1.0 A x 1.8 V
- 1.0 A x 1.5 V
- Supply voltage 3.3 V
- Connection to the base plate using two 100-pin Samtec connectors
- Up to 112 pins of FPGA available to the user (51 differential pairs and 10 single lines)
- 3 LEDs (2 status LEDs and one user LED)
- System management and power sequencing
- EFUSE encryption
- AES encryption
- Evenly distributed power pins to ensure signal integrity
- Permissible operating temperature: 0 ... 70 ° C
- Dimensions: 4 x 5 cm
565105
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
zł1,269.83
Delivery date unknown
No product available!
Base plate for Trenz Electronic 4 x 5 cm modules. It allows you to connect an FPGA system through board-to-board connections to external peripherals to test and develop software. TE0701-06
zł1,482.77
Delivery date unknown
No product available!
TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02
zł950.83
Delivery date unknown
No product available!
Other products in the same category (16)
TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02
zł950.83
4 weeks
No product available!
Base plate designed to work with TE0745 modules. TEB0745-02
zł1,967.40
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2IF
zł4,752.14
4 weeks
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C
zł1,394.68
4 weeks
No product available!
Module with Xilinx Artix 7 35T system, two 100 MBit Ethernet circuits, 512 MB RAM memory, 32 MB flash memory and built-in voltage converters. TE0710-02-35-2CF
zł956.66
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-100-2C3
zł1,458.99
4 weeks
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-02
zł631.22
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF
zł3,628.94
4 weeks
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
zł505.69
4 weeks
No product available!
Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H chip. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-03
zł321.17
4 weeks
No product available!
UltraITX + base board designed to work with TE0808 UltraSOM + MPSoC modules. It allows you to connect the module to external connectors and interfaces. TEBF0808-04
zł3,983.72
4 weeks
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2D
zł911.23
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity. Everything fits on a small 4 x 5 cm tile. TE0711-01-100-2C
zł1,015.12
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2CF
zł2,608.89
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K410T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-410-2CF
zł5,069.38
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K160T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2IF
zł2,863.60
4 weeks
No product available!
Module with Xilinx Artix 7 100T system, two 100 MBit Ethernet circuits, 512 MB RAM memory, 32 MB flash memory and built-in voltage converters. TE0710-02-100-2CF