TE0712-02-200-2C3 - set with Xilinx Artix-7 system
ID: 565112
zł1,716.17
Tax included
zł1,395.26 tax excl.
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C3
Description
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. The product includes Samtec LSHM connectors with a height of 2.5 mm. All modules in this series are mechanically and also largely electrically compatible. You can use TEBA0841-01, TE0703-05 , or TE0705-04 as the base plate for this module.
properties
- Xilinx Artix-7 XC7A200T-2FBG484C FPGA chip
- High resistance to shock and vibration
- 32 MB of Quad-SPI FLASH memory available via FPGA and JTAG
- 4 GTP channels - fast data transmission with a maximum bandwidth of 6.6 Gb / s
- 1 GB 32-bit DDR3 SDRAM
- Layer implementing the Ethernet physical layer (PHY) in RMII mode
- Programmable PLL loop with small jitter (Silicon Labs Si5338)
- Built-in high-performance DC-DC converters
- 12 A x 1.0 V
- 1.5 A x 1.8 V
- 1.5 A x 1.5 V
- Supply voltage: 3.3 V
- Two Samtec LSHM 100-pin and one 60-pin connectors for connecting the base plate (2.5 mm low profile)
- 158 input / output lines (78 symmetric pairs) FPGAs available on board-to-board connections
- System management and power sectioning
- EFUSE encryption
- AES encryption
- Two LEDs
- Evenly distributed power pins to ensure signal integrity
- Working temperature: 0 to 70 ° C
- Size: 4 x 5 cm
565112
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
zł1,269.83
Delivery date unknown
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
zł505.69
Delivery date unknown
No product available!
Other products in the same category (16)
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-200-2C
zł2,372.72
4 weeks
No product available!
Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H chip. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-03
zł321.17
4 weeks
No product available!
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-100-2C
zł1,947.39
4 weeks
No product available!
Industrial SoC module integrating Xilinx Zynq 7020 SoC, Gigabit Ethernet transceiver, 1 GB DDR3 SDRAM and 32 MB Flash memory. Trenz Electronic TE0720-03-2IF
zł1,938.34
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C
zł1,488.67
4 weeks
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-02
zł631.22
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K70T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-070-2CF
zł2,011.30
4 weeks
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C
zł1,394.68
4 weeks
No product available!
UltraITX + base board designed to work with TE0808 UltraSOM + MPSoC modules. It allows you to connect the module to external connectors and interfaces. TEBF0808-04
zł3,983.72
4 weeks
No product available!
Base plate for Trenz Electronic 4 x 5 cm modules. It allows you to connect an FPGA system through board-to-board connections to external peripherals to test and develop software. TE0701-06
zł1,482.77
4 weeks
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2D
zł911.23
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K160T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2IF
zł2,863.60
4 weeks
No product available!
TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02
zł950.83
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2IF
zł4,752.14
4 weeks
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2C
zł911.23
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity. Everything fits on a small 4 x 5 cm tile. TE0711-01-100-2C
zł1,015.12
4 weeks
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C3