List of products by brand Inny

A set of four heat sinks (three ceramic and one aluminum) for Raspberry Pi 4 model B minicomputers. Equipped with self-adhesive tape for easy installation

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 4.0x1.7 mm DC plug. Maximum power up to 100 W

Piezoelectric vibration sensor with analog output, not loaded with mass, can be used as a vibration sensor. LDT0-028K/L

Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 600 mA) connected to the USB socket. There is a diode on the board indicating the power connection. modPS

A pair of 5-pin curved magnetic connectors. It has a 2.2 mm pitch and can conduct a current of 3 A

3-pin ARK mounting strip, 5.0 mm pitch. 301-5.0-03P-12-00A(H)-BC. Set of 10 pieces

Audio module based on a 32-bit PCM5102A DAC converter intended for cooperation, among others with Raspberry Pi minicomputers. Communication via the I2S interface. GY-PCM5102

ESD-17 curved tweezers 125 mm long. Antistatic, antimagnetic. Ideal for working on SMD electronics

Protection circuit for four Li-Ion cells with a voltage of 14.8V. The module has the function of charging cells with the option of a balancer, discharging and a function that protects the cells from excessive discharge. The cells can be charged with continuous current up to 10A

The TEA5767 module with an I²C interface and a frequency range of 76–108 MHz enables FM stereo signal reception in electronic projects. High sensitivity and compact design make it suitable for both mobile and stationary applications.

Pulley GT2 36T B5 for a shaft with a diameter of 5 mm. It has 36 teeth, suitable for a 10mm wide belt

Temperature and humidity sensor DHT21 / AM2301 in housing, -40 to 80 ° C, 0 -100% RH, RoHS

The module has a humidity sensor (accuracy ± 2% RH) and temperature with an accuracy of ± 0.3 ° C. Communication takes place via the I2C bus

FRAM memory module with MB85RC256V chip with a capacity of 32 kB. It is supplied with the voltage from 2.7 to 5.5 V and communicates via the I2C interface

Adapter with two DIP8 sockets and one DIP8 male connector

The 625ZZ bearing is a small, precision deep groove ball bearing with dimensions of 5×16×5 mm (inner diameter × outer diameter × thickness). It features double metal shields that protect against dust and small contaminants, although they are not fully waterproof. Ideal for use in model making, 3D printers, small electric motors, or guide rollers. These bearings are typically made of chrome steel, providing good durability and wear resistance.

Nozzle designed for 3D printers with a Volcano hotend. It is much longer than standard V6 nozzles, which makes it possible to achieve higher print speeds. The Teflon coating prevents the filament from sticking to the nozzle

The 623ZZ bearing is a small, precision deep groove ball bearing with dimensions of 3×10×4 mm (inner diameter × outer diameter × thickness). It features double metal shields that protect against dust and small contaminants, although they are not fully waterproof. Ideal for use in model making, 3D printers, small electric motors, or guide rollers

ARK terminal connector spring 10-pin, pitch 3.5 mm, non-detachable. Set of 5 pieces

Patch Cable, UTP, CAT5E, czerwony, 3.0m, RoHS