zł39.00
100RPM 6V N20M - miniature motor with gear and M3 screw
ID: 582339
5906623459636
zł29.00
Tax included
zł23.58 tax excl.
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 100 RPM, operating voltage 6 V. GA1036-N20M-0055
Description
Small, metal gear motor with M3 threaded shaft, approx. 55 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 100 RPM and a maximum torque of 1,1 kg * cm, consuming a current from 0.055 A to 0.58 A.
Features
- Motor type: medium power (MP)
- Gear ratio: 150:1
- Supply voltage: 3-9 V
- Speed: 100 RPM
- Maximum torque: 1,1 kg*cm
- Minimum current consumption: 0,055 A
- Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Supply voltage
The recommended supply voltage for the motors is 6 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
Dimensions and weight
All N20M engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.
 |
| Dimensions of N20M micromotors (units in mm). |
|---|
Types and parameters of N20M engines:
Our offer includes N20M engines with gear ratios from 50: 1 to 200: 1.
| Gear ratio | Version | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
| 50:1 | MP | 6 V | 300 RPM | 0,4 kg*cm | 55 mA | 0,58 A | LINK |
| 100:1 | MP | 6 V | 200 RPM | 0,7 kg*cm | 55 mA | 0,58 A | LINK |
| 150:1 | MP | 6 V | 100 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK |
| 200:1 | MP | 6 V | 60 RPM | 1,4 kg*cm | 55 mA | 0,58 A | LINK |
| 250:1 | MP | 6 V | 50 RPM | 1,8 kg*cm | 55 mA | 0,58 A | LINK |
| 298:1 | MP | 6 V | 30 RPM | 2,1 kg*cm | 55 mA | 0,58 A | LINK |
Motor controllers
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
 |
 |
 |
| DC motor controller with DRV8838 Pololu system | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with the DRV8835 chip |
Current sensors
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
 |
 |
 |
| Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
582339
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 150:1
- Rotation speed
- 100RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 6V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
30:1 Micro Metal Gearmotor with Extended Motor Shaft
zł117.15
4 weeks
No product available!
Small metal gear motor, 1000 RPM speed, 6V operating voltage. GA12-N20-0018
zł16.72
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł127.19
4 weeks
No product available!
Pololu high power miniature motor with carbon brushes. 100:1 gear motor, shaft speed is 330 rpm, torque 1.6 kg*cm (0.16 Nm). Pololu 3065
zł139.09
24h
Available quantity: 2
Available
Small, high power motor with 298:1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 110 RPM, maximum torque 3.3 kg*cm and carbon brushes for extra durability. Pololu 3045
zł139.15
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł193.09
24h
Available quantity: 2
Available
Pololu low-power miniature engine, with a 15:1 transmission, shaft speed is 1400 rpm, torque is 0.2 kg * cm (0.02 Nm). Pololu 4783
zł132.18
24h
Available quantity: 3
Available
75:1 Micro Metal Gearmotor HP
zł129.90
24h
Available quantity: 1
Available
Small, high power motor with 250: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 130 RPM, maximum torque of 3 kg * cm, carbon brushes and double-sided shaft. Pololu 3055
zł143.57
4 weeks
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł127.19
4 weeks
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specs at 12 V: 320 RPM and 100 mA with no load, 30 oz-in (2.2 kg-cm) and 0.8 A at stall.
zł127.19
24h
Available quantity: 3
Available
100:1 Micro Metal Gearmotor MP
zł113.25
24h
Available quantity: 2
Available
Compact engine with 75: 1 LP transmission, shaft speed is 290 rpm, torque is 0.8 kg * cm (0.08 Nm), plate with connector PH 2.0. DFRobot FIT0457
zł79.04
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł127.19
24h
Available quantity: 1
Available
Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 150 rpm, torque 1,3kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2382
zł132.23
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł127.28
24h
Available quantity: 1
Available
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 100 RPM, operating voltage 6 V. GA1036-N20M-0055